On Sunday 18 August 2002 17:12, you wrote:
> If this Diamond card is a "PC" card (a card with PC VGA BIOS and not "mac"
> OpenFirmware ROM), then you cannot use this in your Mac. Your firmware
> will not know how to enable the card so no matter what XFree86 does, it
> will fail to initialize the
Thanks for the tip,I had some devel files missing that I hadnt noticed right
away,splendidly installed but encountered something else depressing
I upgraded to the 4.2.x version because I had heard about the radeon 32mb SDR
PCI patch included, so I thought this might cover my problem,but it d
Actually, I've already had all kinds of problems with the Stealth in Linux
as a second card, I'd just forgot about it. It seems to perform a little
better with the Nvidia card, but still needs fixing.
With the Trident, I'm finding I can't even get a video BIOS screen when it
boots up, and thi
My new RH 7.3 system hard-locks (no ping response, reboot required) 100% of
the time when I try startx with a 3DLabs Oxygen VX-1 32MB PCI card setup as
second of two displays. It does the same thing if I drop my primary card
and try the Oxygen by itself. My system is an Asus-based P41.8A and I u
I have the same problem with my setup. In fact I have a touch screen
connected. The keyboard just dosent work in X.
-Pranay
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of Paul
Sent: Saturday, August 17, 2002 6:52 PM
To: [EMAIL PROTECTED]
Subject: [Xper
On 18 Aug 2002, Michel [ISO-8859-1] Dänzer wrote:
> Not yet. You can try a patch posted here earlier, unfortunately it
> doesn't seem to fix all problems.
Given that the Radeon driver seems to have gone through a significant
rewrite (correct me if I'm wrong) since I first reported the clipping
p
On Sun, 2002-08-18 at 08:49, Prabhakar Reddy Gudla Venkata Siva wrote:
> On 17 Aug 2002, Michel [ISO-8859-1] Dänzer wrote:
>
> > On Sat, 2002-08-17 at 02:03, Prabhakar Reddy Gudla Venkata Siva wrote:
> > >
> > > For nearly 7-8 months of using radeon mobility ly on my laptop with Xfree
> > > dri
If this Diamond card is a "PC" card (a card with PC VGA BIOS and not "mac"
OpenFirmware ROM), then you cannot use this in your Mac. Your firmware
will not know how to enable the card so no matter what XFree86 does, it
will fail to initialize the card because it was never POST(ed). The Mac
does
On Sun, 18 Aug 2002, Paul Pikowsky wrote:
> I can't seem to get both screens going in multihead using the following
> cards:
>
> Jaton 3DForce2 MX-32 (nvidia geforce2-MX) AGP card as primary.
>
> And either of the two following cards as PCI secondary:
>
> Diamond Stealth II S220
>
> When thi
I can't seem to get both screens going in multihead using the following
cards:
Jaton 3DForce2 MX-32 (nvidia geforce2-MX) AGP card as primary.
And either of the two following cards as PCI secondary:
Diamond Stealth II S220
When this card is used, I get the second screen OK, but the screen is
d
hi,
I know that the cards are pretty old but i really
doubt that the Xv isnt there in the hardware in these
cards cause the windows does it. & i dont think that
windows 2000 is so fast on P4 that it can emulate Xv
for 6 displays of 640x480 each with np & XFree86 cant
do the same on just 3 disp
Hi,
I have some problems with my Matrox Mystique while using XFree86
version 4.0 and higher.
What is wrong:
The X-server freezes the whole system, when moving windows on the
screen or while scrolling the contents of a window. It doesn't happen
instantly, but after about 20 minutes to several ho
hi all
i have a diamond stealth 64 vram with an IBM RGB526CF ramdac chip
i try to run this on an ppc oldworld g3 with xfree4.2.0
xfree4.2.0 status pages says
Support (accelerated) for the 964 (revisions 0 and 1), 968, Trio32, Trio64,
Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/P
On Sun, 18 Aug 2002 11:50, you wrote:
> On Sun, Aug 18, 2002 at 11:51:59AM +1000, Paul wrote:
> > I've noticed that with both 4.0.3 and 4.2.0 when I start XFree86 without
> > a mouse (using -AllowMouseOpenFail) the X server starts fine _but_ the X
> > server doesn't respond to keyboard presses.
>
On Sat, 17 Aug 2002, Sadanand Kota wrote:
> Hi,
> When I try to start Xserver by 'startx', the X hangs after some time.
> When I kill it (Ctrl+Alt+Bakspace), I see these messages.
>
> esd: Esound sound daemon already running or stale Unix socket
> /tmp/.esd/socket
> This socket already exists ind
15 matches
Mail list logo