Hi XPerts (and XFree Support Team), I sit with a rather new Dell Optiplex GX240 on my desk and I am trying to get XFree86 to work. Currently Debian 3.0r0 is installed. I have tried with two different versions of XFree86 to get the ball rolling
- XFree86 4.1.0 as found in Debian 3.0r0 stable - XFree86 4.2.1 as found on http://people.debian.org/~branden/ (XFree86 4.2.1-0pre1v1=) Both versions give me trouble by mentioning (see the full log in attached file "X.log"): [snip] (EE) No devices attached By issuing a "X -configure" a report is printed XFree86 has found a valid card configuration Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward 'scanpci -v' to the XFree86 support team. While unable to find the e-mail adress for the XFree86 support team I send this mail to the xpert mailing list instead hoping to solve my problems. Included are four files: X.log - stdout and stderr from X while running "X >& X.log " in zsh XF86Config-4 - the XFree configuration used scanpci-v.txt - output of 'scanpci -v' lspci-vv.txt - output of 'lspci -vv' (that identifies the card as a ATI Rage 128 Pro TF) Are the next logical steps to wait for a fix of the header file "xf86PciInfo.h" of the XFree86 Team and then recompile XFree86 from CVS? kind regards Flemming
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 03) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] #09 [0104] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ff800000-ff9fffff Prefetchable memory behind bridge: f8000000-fbffffff BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B- 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ff600000-ff7fffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 12) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 12) (prog-if 80 [Master]) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Region 4: I/O ports at ffa0 [size=16] 00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub A) (rev 12) (prog-if 00 [UHCI]) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at ff80 [size=32] 00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 12) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ccd0 [size=16] 00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 12) (prog-if 00 [UHCI]) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff60 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller (rev 12) Subsystem: Dell Computer Corporation: Unknown device 010e Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at c800 [size=256] Region 1: I/O ports at cc40 [size=64] 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 0408 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 16 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Region 1: I/O ports at ec00 [size=256] Region 2: Memory at ff8fc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 78) Subsystem: Dell Computer Corporation: Unknown device 00fe Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2500ns min, 2500ns max), cache line size 10 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at dc80 [size=128] Region 1: Memory at ff6ffc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at ff700000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME-
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x1a30 Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x2090 COMMAND 0x0106 CLASS 0x06 0x00 0x00 REVISION 0x03 pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x8086 device 0x1a31 Intel Device unknown STATUS 0x00a0 COMMAND 0x0107 CLASS 0x06 0x04 0x00 REVISION 0x03 HEADER 0x01 LATENCY 0x40 PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x40 IOBASE 0xe000 IOLIM 0xefff SECSTATUS 0x22a0 NOPREFETCH_MEMBASE 0xff800000 MEMLIM 0xff9fffff PREFETCH_MEMBASE 0xf8000000 MEMLIM 0xfbffffff NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN pci bus 0x0 cardnum 0x1e function 0x0000: vendor 0x8086 device 0x244e Intel Device unknown STATUS 0x0080 COMMAND 0x0107 CLASS 0x06 0x04 0x00 REVISION 0x12 HEADER 0x01 LATENCY 0x00 PRIBUS 0x00 SECBUS 0x02 SUBBUS 0x02 SECLT 0x40 IOBASE 0xd000 IOLIM 0xdfff SECSTATUS 0x2280 NOPREFETCH_MEMBASE 0xff600000 MEMLIM 0xff7fffff PREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN NO_PERR_EN pci bus 0x0 cardnum 0x1f function 0x0000: vendor 0x8086 device 0x2440 Intel Device unknown STATUS 0x0280 COMMAND 0x000f CLASS 0x06 0x01 0x00 REVISION 0x12 HEADER 0x80 LATENCY 0x00 pci bus 0x0 cardnum 0x1f function 0x0001: vendor 0x8086 device 0x244b Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x0280 COMMAND 0x0005 CLASS 0x01 0x01 0x80 REVISION 0x12 BASE4 0x0000ffa1 addr 0x0000ffa0 I/O BYTE_0 0xe307e307 BYTE_1 0x00 BYTE_2 0x806c968 BYTE_3 0xffffffff pci bus 0x0 cardnum 0x1f function 0x0002: vendor 0x8086 device 0x2442 Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x0280 COMMAND 0x0005 CLASS 0x0c 0x03 0x00 REVISION 0x12 BASE4 0x0000ff81 addr 0x0000ff80 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x0b pci bus 0x0 cardnum 0x1f function 0x0003: vendor 0x8086 device 0x2443 Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x0280 COMMAND 0x0001 CLASS 0x0c 0x05 0x00 REVISION 0x12 BASE4 0x0000ccd1 addr 0x0000ccd0 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0a BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0x806d058 BYTE_3 0xffffffff pci bus 0x0 cardnum 0x1f function 0x0004: vendor 0x8086 device 0x2444 Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x0280 COMMAND 0x0005 CLASS 0x0c 0x03 0x00 REVISION 0x12 BASE4 0x0000ff61 addr 0x0000ff60 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x09 pci bus 0x0 cardnum 0x1f function 0x0005: vendor 0x8086 device 0x2445 Intel Device unknown CardVendor 0x1028 card 0x010e (Card unknown) STATUS 0x0280 COMMAND 0x0005 CLASS 0x04 0x01 0x00 REVISION 0x12 BASE0 0x0000c801 addr 0x0000c800 I/O BASE1 0x0000cc41 addr 0x0000cc40 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0a pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446 ATI Device unknown CardVendor 0x1002 card 0x0408 (ATI, Card unknown) STATUS 0x02b0 COMMAND 0x0083 CLASS 0x03 0x00 0x00 REVISION 0x00 BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10 BASE0 0xf8000008 addr 0xf8000000 MEM PREFETCHABLE BASE1 0x0000ec01 addr 0x0000ec00 I/O BASE2 0xff8fc000 addr 0xff8fc000 MEM BASEROM 0x80000000 addr 0x80000000 not-decode-enabled MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b pci bus 0x2 cardnum 0x0c function 0x0000: vendor 0x10b7 device 0x9200 3COM Device unknown CardVendor 0x1028 card 0x00fe (Card unknown) STATUS 0x0210 COMMAND 0x0117 CLASS 0x02 0x00 0x00 REVISION 0x78 BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10 BASE0 0x0000dc81 addr 0x0000dc80 I/O BASE1 0xff6ffc00 addr 0xff6ffc00 MEM BASEROM 0xff700000 addr 0xff700000 not-decode-enabled MAX_LAT 0x0a MIN_GNT 0x0a INT_PIN 0x01 INT_LINE 0x0b
X.log
Description: Binary data
XF86Config-4
Description: Binary data