These two seems unrelated. look under deploy/ipk folder and see if you have an
ipk sounding with same name as missing package
it might be that its empty and deleted but the dependency remains
> On Jan 7, 2016, at 1:29 PM, John Schluechtermann
> wrote:
>
>
Hi,
On Sun, Dec 20, 2015 at 10:58 PM, Leon Anavi wrote:
> Python module to control the Raspberry Pi Sense HAT used in
> the Astro Pi mission. This recipe provides the officially
> supported library for the Sense HAT with access to all of the
> on-board sensors and the LED
On Thu, Dec 17, 2015 at 12:42 AM, Andrei Gherzan wrote:
> Signed-off-by: Andrei Gherzan
> ---
> conf/machine/raspberrypi0.conf | 6 ++
> 1 file changed, 6 insertions(+)
> create mode 100644 conf/machine/raspberrypi0.conf
>
> diff --git
Hi,
On Sun, Dec 20, 2015 at 9:53 PM, Leon Anavi wrote:
> RTIMULib is a C++ and Python library that makes it easy to use
> 9-dof and 10-dof IMUs with embedded Linux systems. Python
> module for Raspberry Pi Sense HAT depends on it.
>
> Python module python-rtimu uses the source
ky-linux"
MACHINE = "qemux86"
DISTRO= "poky"
DISTRO_VERSION= "2.0+snapshot-20160111"
TUNE_FEATURES = "m32 i586"
TARGET_FPU= ""
meta
meta-yocto
meta-yocto-bsp= "master:221d864042658daa054281aab439b44
On Mon, Jan 11, 2016 at 9:34 PM, Andrei Gherzan wrote:
> On Mon, Jan 11, 2016 at 04:46:10PM +0100, John Madieu wrote:
>> Because EGL properties were not defined properly, we always had the
>> following error
>> make: *** [egl] Error 1
>> | EGL disabled.
>> | The
2016-01-11 21:32 skrev Andrei Gherzan:
> On Mon, Jan 11, 2016 at
09:55:43AM -0800, Khem Raj wrote:
>
>>> On Jan 11, 2016, at 8:49 AM,
Petter Mabäcker wrote: Add basic support for PiTFT
display by using device-trees. In order get it working below
configurations must be
On Mon, Jan 11, 2016 at 04:46:10PM +0100, John Madieu wrote:
> Because EGL properties were not defined properly, we always had the following
> error
> make: *** [egl] Error 1
> | EGL disabled.
> | The EGL functionality test failed; EGL is required by some QPA plugins
> to manage
On Mon, Jan 11, 2016 at 09:55:43AM -0800, Khem Raj wrote:
>
> > On Jan 11, 2016, at 8:49 AM, Petter Mabäcker wrote:
> >
> > Add basic support for PiTFT display by using device-trees.
> >
> > In order get it working below configurations must be active in
> > local.conf:
> >
> >
Hi Andrei,
On 2016-01-11 12:08, Andrei Gherzan wrote:
Hi,
On Sun, Dec 20, 2015 at 9:53 PM, Leon Anavi wrote:
RTIMULib is a C++ and Python library that makes it easy to use
9-dof and 10-dof IMUs with embedded Linux systems. Python
module for Raspberry Pi Sense HAT depends on
Hi John,
On Mon, Jan 11, 2016 at 3:55 AM, John Madieu wrote:
> Signed-off-by: John Madieu
> ---
> qt5-layer/recipes-qt/qt5/qtbase_%.bbappend | 11 +++
> 1 file changed, 3 insertions(+), 8 deletions(-)
>
> diff --git
I want to move files to root file system. My SRC_URI is a tar.gz file.
Include many file and directory.
BB detail :
SUMMARY = "Simple move application"
SECTION = "move"
LICENSE = "CLOSED"
INHIBIT_PACKAGE_STRIP = "1"
INSANE_SKIP_${PN} = "ldflags"
SRC_URI = "file://rootfs.tar.gz"
S =
On 16-01-08 10:51 AM, Daniel Dragomir wrote:
Hi Bruce,
Please apply this series of fixes to Axxia platform drivers on
the standard/axxia/base branch from linux-yocto-4.1.
This series of patches brings various improvements and warning fixes
to the Intel Axxia drivers including MISC, PCI, FEMAC,
On Mon, Jan 11, 2016 at 2:49 PM, Andrei Gherzan wrote:
>
> Hi John,
Hello Andrei
>
> On Mon, Jan 11, 2016 at 3:55 AM, John Madieu wrote:
>>
>> Signed-off-by: John Madieu
>> ---
>> qt5-layer/recipes-qt/qt5/qtbase_%.bbappend | 11
AUH finished upgrade batch the result patches/logs can be found at:
https://logs.yoctoproject.org/auh//20160108161501.tar.gz, next are the
statistics:
Recipe upgrade statistics:
* Failed(do_patch): 1
dbus-test, 1.10.6, Chen Qi
* Succeeded: 63
With newer kernels (>=3.18) that supports device-trees I2C
should be enabled with device-trees.
This is now support by adding:
ENABLE_I2C = "1"
in local.conf
This will enable the dtparams:
i2c1
i2c_arm
Signed-off-by: Petter Mabäcker
---
README
Add basic support for PiTFT display by using device-trees.
In order get it working below configurations must be active in
local.conf:
MACHINEOVERRIDES .= ":pitft"
- This will enable SPI bus and i2c device-trees, it will also setup
framebuffer for console and x server on PiTFT.
[Support #70]
Hello,
I want to set up mirror server for the source code I use for my embedded target.
So what I have are archives e.g. tar.gz, ... that i placed in a directory
on a webserver http://mirror.server/mirror/ and this works fine.
I also want to mirror the git repositories. So on the server
Signed-off-by: Petter Mabäcker
---
.gitignore | 1 +
1 file changed, 1 insertion(+)
diff --git a/.gitignore b/.gitignore
index 1677b58..f235765 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,3 @@
build*
*~
+.*.swp
--
1.9.1
--
[Support #69]
Signed-off-by: Petter Mabäcker
---
recipes-kernel/linux/linux-raspberrypi_4.1.bb | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/recipes-kernel/linux/linux-raspberrypi_4.1.bb
b/recipes-kernel/linux/linux-raspberrypi_4.1.bb
index
- Add support to build overlays for PiTFT22 in the kernel.
- Setup a basic configuration for the driver
The PiTFT22 support is optional and can be enabled by adding below in
local.conf:
MACHINEOVERRIDES .= ":pitft:pitft22"
[Support #70]
Signed-off-by: Petter Mabäcker
---
Various fixes from Technux, with focus on PiTFT support.
Petter Mabäcker (5):
.gitignore: Ignore .swp files
linux-raspberrypi: Update 4.1 recipe to 4.1.15
rpi-config: I2C support
pitft: Add basic support for PiTFT
pitft: Add PiTFT22 support
.gitignore
Because EGL properties were not defined properly, we always had the following
error
make: *** [egl] Error 1
| EGL disabled.
| The EGL functionality test failed; EGL is required by some QPA plugins
to manage cont
| You might need to modify the include and library search paths by
Signed-off-by: John Madieu
---
conf/layer.conf | 4
1 file changed, 4 insertions(+)
diff --git a/conf/layer.conf b/conf/layer.conf
index bea5a65..60f1bcb 100644
--- a/conf/layer.conf
+++ b/conf/layer.conf
@@ -12,3 +12,7 @@ BBFILE_PRIORITY_raspberrypi = "9"
#
Because EGL properties were not defined properly, we always had the following
error
make: *** [egl] Error 1
| EGL disabled.
| The EGL functionality test failed; EGL is required by some QPA plugins
to manage cont
| You might need to modify the include and library search paths by
Signed-off-by: John Madieu
---
conf/layer.conf | 4
1 file changed, 4 insertions(+)
diff --git a/conf/layer.conf b/conf/layer.conf
index bea5a65..60f1bcb 100644
--- a/conf/layer.conf
+++ b/conf/layer.conf
@@ -12,3 +12,7 @@ BBFILE_PRIORITY_raspberrypi = "9"
#
On Mon, Jan 11, 2016 at 3:21 PM, john madieu wrote:
> On Mon, Jan 11, 2016 at 2:49 PM, Andrei Gherzan wrote:
> >
> > Hi John,
> Hello Andrei
> >
> > On Mon, Jan 11, 2016 at 3:55 AM, John Madieu
> wrote:
> >>
> >> Signed-off-by: John
> On Jan 11, 2016, at 8:49 AM, Petter Mabäcker wrote:
>
> Add basic support for PiTFT display by using device-trees.
>
> In order get it working below configurations must be active in
> local.conf:
>
> MACHINEOVERRIDES .= ":pitft”
Using MACHINE_FEATURES will be more
On 01/11/2016 04:27 PM, Bruce Ashfield wrote:
On 16-01-08 10:51 AM, Daniel Dragomir wrote:
Hi Bruce,
Please apply this series of fixes to Axxia platform drivers on
the standard/axxia/base branch from linux-yocto-4.1.
This series of patches brings various improvements and warning fixes
to the
> On Jan 11, 2016, at 9:33 AM, Michael Habibi wrote:
>
> Unfortunately I don't think this will work well, because generally http
> protocol URLs are slightly different than git protocol URLs. However, in my
> work environment, our firewall blocks git protocol. This means
30 matches
Mail list logo