Hi,
Could you please tell me more details about the contents of the
can-socket-support-kernel.cfg file ?
I have put:
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
into it, is that enough, or any other config needed?
BR,
Teng
2014/1/3 wuteng wu
> Hi,
>
> I think i have just fo
With the caution that I'm a bit clumsy at Yocto myself, here's how I did
it, using kernel fragments.
So in meta-myboard/recipes-kernel/linux/ I have something like the attached
.bbappend file.
Then in meta-myboard/recipes-kernel/linux/linux-yocto is the
can-socket-support-kernel.cfg file. The ver
Hi,
I think i have just found where to do the configure, under the dir:
/poky/meta-atmel/recipes-kernel/linux/files/sama5d3xek, i will try out your
config file, thanks alot.
2014/1/3 wuteng wu
> Hi, could you tell me how to clean and rebuild the kernel?
> I'm newbie to yocto, i have done somet
Hi, could you tell me how to clean and rebuild the kernel?
I'm newbie to yocto, i have done something like linux-menuconfig when i
used the build-root, bu which i can config the kernel configuration, but i
don't know how to do it in yocto, at least i didn't find any reference in
ref-manual.
2014/
Hi,
I have cross compiled the canutils and installed it into the target rootfs,
but when i tried to test the CAN bus by using the candump command as below:
candump can0
interface = can0, family = 29, type = 3, proto = 1
*socket: Protocol not supported*
I got the "socket: Protocol not supported"
