On Wed, Jul 24, 2019 at 05:53:36PM +, Andy Pont wrote:
> I am trying to build a Yocto (warrior) image for the AM335x using meta-ti
> and meta-qt5 that will render directly to the GPU. Initially this will be
> for the Beaglebone Black but then ultimately will be for a custom hardware
>
HI Denys / Robert ,
Thanks , got the board boot up now.
Followed below mentioned steps ( just in case if any one face similar
problem )
1) Erase the MMC
=> mmc dev 1
=> mmc erase 0 512
2) Install TFTP server on host
Hi everyone,
I was trying to bring-up the AGL on Pandaboard. With the default yocto
layer(meta-ti) in the AGL source code, I was able to generate the target
image(agl-image-minimal). When I tried to boot the board with the generated
image, the board is not booting and even I didn't see any log on
Hi Satya,
> I am building the core-image-minimal for Daisy with meta-ti layer included in
> bblayers.conf file after removing meta-yocto-bsp layer. I am getting the
> error shown below,
This is a very old version. Please update to one of the latest supported
releases.
>
Dear All,
I am building the core-image-minimal for Daisy with meta-ti layer included
in bblayers.conf file after removing meta-yocto-bsp layer. I am getting the
error shown below,
[Satya]~/Yocto-Daisy-Labs/poky/build
bitbake core-image-minimal
Loading cache: 100%
On Tue, Jun 9, 2015 at 9:34 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Tue, Jun 9, 2015 at 9:14 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-06-09 9:12 PM, Brian Hutchinson wrote:
On Tue, May 19, 2015 at 12:42 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On
On 2015-06-09 9:12 PM, Brian Hutchinson wrote:
On Tue, May 19, 2015 at 12:42 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Tue, May 19, 2015 at 12:31 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-05-19 07:39 AM, Bruce Ashfield wrote:
On Fri, May 15, 2015 at 4:21 PM,
On Tue, Jun 9, 2015 at 9:14 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-06-09 9:12 PM, Brian Hutchinson wrote:
On Tue, May 19, 2015 at 12:42 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On Tue, May 19, 2015 at 12:31 PM, Bruce Ashfield
bruce.ashfi...@windriver.com
On Tue, May 19, 2015 at 12:42 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Tue, May 19, 2015 at 12:31 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-05-19 07:39 AM, Bruce Ashfield wrote:
On Fri, May 15, 2015 at 4:21 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On
On Fri, May 15, 2015 at 4:21 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Fri, May 15, 2015 at 3:26 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On Fri, May 15, 2015 at 9:55 AM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On Thu, May 14, 2015 at 6:16 PM, Brian Hutchinson
On Tue, May 19, 2015 at 12:31 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-05-19 07:39 AM, Bruce Ashfield wrote:
On Fri, May 15, 2015 at 4:21 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On Fri, May 15, 2015 at 3:26 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On
On 2015-05-19 07:39 AM, Bruce Ashfield wrote:
On Fri, May 15, 2015 at 4:21 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Fri, May 15, 2015 at 3:26 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Fri, May 15, 2015 at 9:55 AM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Thu, May
On Thu, May 14, 2015 at 6:16 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On May 14, 2015 6:08 PM, Denys Dmytriyenko de...@denix.org wrote:
On Tue, May 12, 2015 at 11:35:20AM -0400, Bruce Ashfield wrote:
On 2015-05-12 10:20 AM, Brian Hutchinson wrote:
On Mon, May 11, 2015 at 3:06 PM,
On Fri, May 15, 2015 at 3:26 PM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Fri, May 15, 2015 at 9:55 AM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On Thu, May 14, 2015 at 6:16 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On May 14, 2015 6:08 PM, Denys Dmytriyenko
On Fri, May 15, 2015 at 9:55 AM, Brian Hutchinson b.hutch...@gmail.com wrote:
On Thu, May 14, 2015 at 6:16 PM, Brian Hutchinson b.hutch...@gmail.com
wrote:
On May 14, 2015 6:08 PM, Denys Dmytriyenko de...@denix.org wrote:
On Tue, May 12, 2015 at 11:35:20AM -0400, Bruce Ashfield wrote:
On
On May 14, 2015 6:08 PM, Denys Dmytriyenko de...@denix.org wrote:
On Tue, May 12, 2015 at 11:35:20AM -0400, Bruce Ashfield wrote:
On 2015-05-12 10:20 AM, Brian Hutchinson wrote:
On Mon, May 11, 2015 at 3:06 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-05-11 02:10 PM,
On Tue, May 12, 2015 at 11:35:20AM -0400, Bruce Ashfield wrote:
On 2015-05-12 10:20 AM, Brian Hutchinson wrote:
On Mon, May 11, 2015 at 3:06 PM, Bruce Ashfield
bruce.ashfi...@windriver.com wrote:
On 2015-05-11 02:10 PM, Brian Hutchinson wrote:
On Thu, Apr 30, 2015 at 10:06 AM, Bruce
I've noticed a few issues with the pandaboard image that builds.
1. core-image-sato does not have WiFi capability. I think it's missing firmware.
2. core-image-base is missing the linux-firmware. I added:
IMAGE_INSTALL_append = linux-firmware. Now I have the necessary firmware to
bring up
On Mon, Feb 24, 2014 at 5:34 AM, Raul Rosetto Munoz munoz0r...@gmail.comwrote:
I couldnt see this folders:
root@beaglebone:/lib/fir
an
mware# export SLOTS=/sys/devices/bone_capemgr.9/slots
can you use the kernel from meta-beagleboard and check if you get cape
support
Denys, Thanks for all Reply,
I understand that if I use udev at version 178 or more, I probable will get
a udev with solved firmware problems, however if I use this udev version I
will need to use a systemd packages.
Is possible you give some intructions how to put systemd and udev 178+ at
my
Any suggestions?
I really do not know what to do, the file /lib/udev/firmware never appear.
Thank you.
2013/2/14 Raul Rosetto Munoz munoz0r...@gmail.com
Now Im with 173 from meta-fsl bbapend, but I tryed with many others from
meta-oe and poky.
2013/2/14 Denys Dmytriyenko de...@ti.com
Yes I install this package,
But I think that the problem is that the binary firmware at /lib/udev
doesn't come with the build.
Some one know how to build the binary firmware at /lib/udev responsible
to record the firmware in wifi dongle and enable the udev rules for this
action.
Thanks for all
On Thu, Feb 07, 2013 at 06:26:46PM -0200, Raul Rosetto Munoz wrote:
Hello All,
I need to configure my yocto project to work with wifi dongle realteck
rtl8192cu.
My first problem is that the module does not go up automatically rtl8192cu
different than Angstron distro that when I plug the
Hello,
Any help will be appreciated..
Following the steps at site
*http://maniacbug.wordpress.com/2012/08/03/pandayocto/* with minor
changes.
Not using poky-denzil-7.0 instead using latest version as of 12/22/12 (see
below). Did not git checkout 30fb40ebc13614a74c2e237927c60ac43e01d1bc
instead
On Thu, Nov 22, 2012 at 12:26:12AM +0100, Nicolas Dechesne wrote:
looping rob clark (upstream author)
On Thu, Nov 22, 2012 at 12:07 AM, Burton, Ross ross.bur...@intel.comwrote:
On 21 November 2012 22:52, Nicolas Dechesne nde...@gmail.com wrote:
since xf86-video-omap was recently
On Mon, Oct 08, 2012 at 12:18:24PM +0100, Paul Eggleton wrote:
Hi Andreas,
On Monday 08 October 2012 12:54:46 Andreas Müller wrote:
as some of you might know, gumstix created an official BSP layer
[1][2]. To avoid confusion I renamed my layer from meta-gumstix to
meta-gumstix-community
Hi,
When i use the HOB functionality in yocto with the meta-ti, I get an
error message after about 5% with no error message in it. I can only press
close.
I use the default layers but I do see that HOB re-arranges them into:
Poky/meta
Poky/meta-hob
Poky/meta-ti
Poky/meta-yocto
I
:29 AM
To: Denys Dmytriyenko
Cc: meta...@yoctoproject.org; yocto@yoctoproject.org
Subject: Re: [yocto] [meta-ti] [HOB] issue
Hi,
When i use the HOB functionality in yocto with the meta-ti, I get an error
message after about 5% with no error message in it. I can only press close.
I use
Hi all,
Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
compatible with yocto-1.2 (denzil) branch ? Or also depends on other
layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
working, there is an unmet dependency on systemd.bbclass.
yocto-1.2$ bitbake
On 18/05/12 08:48, Enric Balletbò i Serra wrote:
Hi all,
Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
compatible with yocto-1.2 (denzil) branch ? Or also depends on other
layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
working, there is an unmet
Hi Jack
2012/5/18 Jack Mitchell m...@communistcode.co.uk:
On 18/05/12 08:48, Enric Balletbò i Serra wrote:
Hi all,
Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
compatible with yocto-1.2 (denzil) branch ? Or also depends on other
layers. Adding only the meta-ti
On 2012-05-18 04:36, Enric Balletbò i Serra wrote:
Hi Jack
2012/5/18 Jack Mitchellm...@communistcode.co.uk:
On 18/05/12 08:48, Enric Balletbò i Serra wrote:
Hi all,
Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
compatible with yocto-1.2 (denzil) branch ? Or also
i'm perfectly prepared to be told this is not the right forum to
mention this, but i just cloned the meta-ti layer and in conf/machine,
there appear to be two pandaboard-related files:
omap4430-panda.conf:
#@TYPE: Machine
#@NAME: OMAP4430 Panda
#@DESCRIPTION: Machine configuration for the
On Fri, Feb 24, 2012 at 4:07 PM, Monk, Roger r-m...@ti.com wrote:
I don't think it is worth spending too much time debugging this, since this
version of syslink is pretty old now and there will likely be further issues
in this environment even if we can can get th build to complete, since
Oops, hit return too quick on auto completion of email address ...
this was meant for meta-ti list!
Please forgive me and sorry for the noise.
Brian
___
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
On (23/12/11 12:59), Bruce Ashfield wrote:
On 11-12-23 12:52 PM, Koen Kooi wrote:
Op 23 dec. 2011, om 18:45 heeft Bruce Ashfield het volgende geschreven:
On 11-12-23 12:38 PM, Philip Balister wrote:
On 12/23/2011 12:10 PM, Bruce Ashfield wrote:
On 11-12-23 08:10 AM, James Abernathy wrote:
On 12-01-04 12:15 AM, Khem Raj wrote:
On (23/12/11 12:59), Bruce Ashfield wrote:
On 11-12-23 12:52 PM, Koen Kooi wrote:
Op 23 dec. 2011, om 18:45 heeft Bruce Ashfield het volgende geschreven:
On 11-12-23 12:38 PM, Philip Balister wrote:
On 12/23/2011 12:10 PM, Bruce Ashfield wrote:
On
On Dec 23, 2011, at 3:50 AM, Koen Kooi wrote:
Op 23 dec. 2011, om 09:37 heeft Paul Eggleton het volgende geschreven:
On Friday 23 December 2011 09:28:31 Koen Kooi wrote:
Op 22 dec. 2011, om 16:06 heeft Jim Abernathy het volgende geschreven:
I know the examples in the documentation of
Op 23 dec. 2011, om 14:10 heeft James Abernathy het volgende geschreven:
On Dec 23, 2011, at 3:50 AM, Koen Kooi wrote:
Op 23 dec. 2011, om 09:37 heeft Paul Eggleton het volgende geschreven:
On Friday 23 December 2011 09:28:31 Koen Kooi wrote:
Op 22 dec. 2011, om 16:06 heeft Jim
On 12/23/2011 08:43 AM, Paul Eggleton wrote:
On Friday 23 December 2011 14:23:53 Koen Kooi wrote:
Being a Yocto newbie, it's hard enough to understand all the branches on
the yocto site. Relating the meta-angstrom is confusing.
No, yocto (or is it poky? noone knows)
Officially, Poky is
On 11-12-23 08:10 AM, James Abernathy wrote:
On Dec 23, 2011, at 3:50 AM, Koen Kooi wrote:
Op 23 dec. 2011, om 09:37 heeft Paul Eggleton het volgende geschreven:
On Friday 23 December 2011 09:28:31 Koen Kooi wrote:
Op 22 dec. 2011, om 16:06 heeft Jim Abernathy het volgende geschreven:
I
On 11-12-23 12:38 PM, Philip Balister wrote:
On 12/23/2011 12:10 PM, Bruce Ashfield wrote:
On 11-12-23 08:10 AM, James Abernathy wrote:
On Dec 23, 2011, at 3:50 AM, Koen Kooi wrote:
Op 23 dec. 2011, om 09:37 heeft Paul Eggleton het volgende geschreven:
On Friday 23 December 2011 09:28:31
I know the examples in the documentation of Yocto use meta-intel a lot
to get the board specific BSPs like meta-crownbay or meta-n450.
Is there a meta-ti or similar that gets you the meta-beagleboard and
meta-pandaboard? If not how do you clone and checkout the pandaboard BPS?
Jim A
On Thu, Dec 22, 2011 at 8:06 AM, Jim Abernathy jfaberna...@gmail.com wrote:
I know the examples in the documentation of Yocto use meta-intel a lot to
get the board specific BSPs like meta-crownbay or meta-n450.
Is there a meta-ti or similar that gets you the meta-beagleboard and
44 matches
Mail list logo
