Hi,
I have some problems with the "new" EUB-8301.
The "old" SUB-8301 works fine with the same software.
According to the manufacturer is SUB-8301 and EUB-8301 (also NUB-8301) the same.
SUB-8301: Vendor=1740 ProdID=2000 Rev=47.21 FCC ID NI3-UB83005001
EUB-8301: Vendor=1740 ProdID=2000 Rev=47.21 FC
Hi,
we are using the NUB-8301 (zd1211 with AL7230B rf module) in a portable
device. In order to length the uptime we need to reduce the power
consumption. WLAN is the top power consumer it deems necessary to
implement powersave mode on the zd1211rw driver.
What is the status?
Anybody working on t
Uli Kunitz wrote:
> Am 15.01.2007 um 14:59 schrieb Peter Lueg:
>
>> FrameWLAN Sequence=nRetry bit=0
>> Retry 1 WLAN Sequence=nRetry bit=1
>> Retry 2 WLAN Sequence=nRetry bit=1
>> Retry 3 WLAN Sequence=nRetry bit=1
>> Retry
Hi,
i use
Senao SUB-8301 USB WLAN module (AL7230B_RF rf chip)
Firmware: V1.1 (same V1.3)
Kernel: 2.6.18-rc2
zd1211rw git: 83c15ac14de7a01633c07e1c68226c73f9c92421 (old but works)
While sniffing the WLAN communication between the USB WLAN module and an
Access Point we found an extraordinary beha
Hi,
In 10m distance (access point to client) I have a greater signal level
as in 1m distance ?!
I add a printk about status->signal_strength in fill_rx_stat() and see
the same.
How does it possible?
If I test with two access points the client select the "wrong" one.
The reason of this behavior i
Hi,
I have some problems with the roaming.
It doesn't work.
I switch the access point off but nothing happen.
Is there no function to check the beacons (like zd1205_watchdog from the
zd1211 project)?
Thanks in-advance
Peter
Hi,
I try your HEAD from http://www.deine-taler.de/zd1211/zd1211.git and
WEP104 is working
The "ICV mismatch" error is not longer present.
Thanks a lot.
Here the results of my tests (PXA270):
Access point (cisco1100): with "Open Authentication"
Client: WEP128 with open authentication is worki
.
Test with restricted key (this time with the right configuration from
the access point) fails also (PXA270 and Laptop).
On both systems I become kernel oops (PXA oops see below).
I use access points from RoamAbout and Cisco.
Thanks in-advance
Peter
Ulrich Kunitz wrote:
> On 06-07-28 10:28 Pe
Hi,
I use a ZD1211 with AL7230B RF chip and the latest zd1211rw driver
version from Daniel.
Firmware version: zd1211_fw_2006-07-21
CPU: PXA270
Without encryption everything works fine.
When I use WEP encryption than comes the following problems:
1) iwconfig eth0 key open
The authentication and