Would this work? (to get rid of an EFI label).
dd if=/dev/zero of=/dev/dsk/ bs=1024k count=1
Then use
format
format might complain that the disk is not labeled. You
can then label the disk.
Dale
Antonius wrote:
> can you recommend a walk-through for this process, or a bit
See inline near then end...
Tomas Ă–gren wrote:
On 14 May, 2007 - Dale Sears sent me these 0,9K bytes:
I was wondering if this was a good setup for a 3320 single-bus,
single-host attached JBOD. There are 12 146G disks in this array:
I used:
zpool create pool1 \
raidz2 c2t0d0 c2t1d0 c2t2d0
I was wondering if this was a good setup for a 3320 single-bus,
single-host attached JBOD. There are 12 146G disks in this array:
I used:
zpool create pool1 \
raidz2 c2t0d0 c2t1d0 c2t2d0 c2t3d0 c2t4d0 c2t5d0 c2t6d0 c2t8d0 c2t9d0
c2t10 \
spare c2t11d0 c2t12d0
(or something very similar)
This