Jeff Creek wrote: > I posted this in ZFS-Discuss. Eric Schrock suggested I ask in this forum. > > I am trying to test a new setup of NV74. I have set up the system with ZFS > boot. Everything works fine until I pull a drive. The system locks up when I > try to run any command e.g. zpool status. There is no communication with the > server from then on. It does not even respond to pings. > > Setup - > > Supermicro SC836TQ-R800 Chassis > Supermicro X7DB8 Motherboard > Supermicro SAT2-MV8 SATA controller > Hitatchi Deskstar Harddrives 2 80GB Mirrored and 4 1 TB RaidZ > Autoreplace set to ON > > If i push the reset button the system will come back up ok. I can then run > zpool status and find which drive is 'bad'. I would rather the system keep > functioning so I can just run the zpool status and then replace the 'bad' > drive. > > Is this setup not supported? Is there something I missed? What SATA > controller (if any) is supported for hot swap? >
I believe that the device you have is a Marvell88SX6081, but without prtconf output it is hard to say. If you were to post the output from prtconf -pv and prtconf -D it might help figure out what is happening here. /var/adm/messages contents might also be useful as well as the output from cfgadm. Regards, Lida > Thanks, > > Jeff > > > This message posted from opensolaris.org > _______________________________________________ > storage-discuss mailing list > [EMAIL PROTECTED] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss > _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss