As a follow-up, I tried a SuperMicro enclosure (SC847E26-RJBOD1). I have 3
sets of 15 drives. I got the same results when I loaded the second set of
drives (15 to 30).
Then, I tried changing the LSI 9200's BIOS setting for max INT 13 drives from
24 (the default) to 15. From then on, the Supe
Markus,
I'm pretty sure that I have the MD1000 plugged in properly, especially since
the same connection works on the 9280 and Perc 6/e. It's not in split mode.
Thanks for the suggestion, though.
--
This message posted from opensolaris.org
___
zfs-dis
> Any suggestions? Is there some sort of boot procedure, in order to get the
> system to recognize the second enclosure without locking up? Is there a
> special way to > configure one of these LSI boards?
It should just work, make sure you connect it right way and both JBODs are not
in "spl
I have 15x SAS drives in a Dell MD1000 enclosure, attached to an LSI 9200-16e.
This has been working well. The system is boothing off of internal drives, on
a Dell SAS 6ir.
I just tried to add a second storage enclosure, with 15 more SAS drives, and I
got a lockup during Loading Kernel. I go
