I am running basic mirroring in a server setup. When I pull out a hard drive
and put it back in, it won't detect it and resilver it until I reboot the
system. Is there a way to force it to detect it and resilver it in real time?
Thank you.
Dan
--
This message posted from opensolaris.org
Daniel S wrote:
I am running basic mirroring in a server setup. When I pull out a hard drive
and put it back in, it won't detect it and resilver it until I reboot the
system. Is there a way to force it to detect it and resilver it in real time?
More info on your hardware is required. In
I create two zfs's on one pool of four disks with two mirrors, such as...
/
zpool create tank mirror disk1 disk2 mirror disk3 disk4
zfs create tank/fs1
zfs create tank/fs2/
Are fs1 and fs2 striped across all four disks?
If two disks fail that represent a 2-way mirror, do I lose data?
Brian.
The file systems are striped between the two mirrors. (If your disks are A, B,
C, D then a single file's blocks would reside on disks A+B, then C+D, then A+B
again.)
If you lose A and B, or C and D, you lose the whole pool. (Hence if you have
two power supplies, for instance, you'd probably
On Dec 5, 2007 9:54 PM, Brian Lionberger [EMAIL PROTECTED] wrote:
I create two zfs's on one pool of four disks with two mirrors, such as...
/
zpool create tank mirror disk1 disk2 mirror disk3 disk4
zfs create tank/fs1
zfs create tank/fs2/
Are fs1 and fs2 striped across all four disks?
Yes
