Hi Jeremy,
I had a loosely similar problem with my 2009.06 box. In my case (which may not
be yours), working with support we found a bug that was causing my pool to
hang. I also got erroneous errors when I did a scrub ( 3 x 5 disk raidz). I am
using the same LSI controller. A sure fire way to
On Oct 26, 2009, at 4:00 PM, Cindy Swearingen wrote:
Hi Jeremy,
Can you use the command below and send me the output, please?
Thanks,
Cindy
# mdb -k
::stacks -m zfs
Ok, it did it again. I replaced the drive and it's currently
resilvering (13.66% done, 135h33m to go it says) and the
Jeremy,
I generally suspect device failures in this case and if possible,
review the contents of /var/adm/messages and fmdump -eV to see
if the pool hang could be attributed to failed or failing devices.
Cindy
On 10/26/09 17:28, Jeremy Kitchen wrote:
Cindy Swearingen wrote:
Hi Jeremy,
Can
Cindy Swearingen wrote:
Jeremy,
I generally suspect device failures in this case and if possible,
review the contents of /var/adm/messages and fmdump -eV to see
if the pool hang could be attributed to failed or failing devices.
perusing /var/adm/messages, I see:
Oct 22 05:06:11
Jeremy Kitchen wrote:
Cindy Swearingen wrote:
Jeremy,
I generally suspect device failures in this case and if possible,
review the contents of /var/adm/messages and fmdump -eV to see
if the pool hang could be attributed to failed or failing devices.
perusing /var/adm/messages, I see:
Hi Jeremy,
The ereport.io.scsi.cmd.disk.tran is describing connections
problems to the /p...@0,0/pci8086,4...@5/pci1000,3...@0/s...@30,0
device. I think the .tran suffix is for transient.
ZFS might be reporting problems with device as well, but if the
zpool/zfs commands are hanging, then it
Jeremy,
I can't comment on your hardware because I'm not familiar with it.
If you have a storage pool with ZFS redundancy and one device fails
or begins failing, then the pool keeps going, in a degraded mode but
is generally available.
You can try setting the failmode property to continue,
Jeremy Kitchen wrote:
Hey folks!
We're using zfs-based file servers for our backups and we've been having
some issues as of late with certain situations causing zfs/zpool
commands to hang.
anyone? this is happening right now and because we're doing a restore I
can't reboot the machine, so
Hi Jeremy,
Can you use the command below and send me the output, please?
Thanks,
Cindy
# mdb -k
::stacks -m zfs
On 10/26/09 11:58, Jeremy Kitchen wrote:
Jeremy Kitchen wrote:
Hey folks!
We're using zfs-based file servers for our backups and we've been having
some issues as of late with
Cindy Swearingen wrote:
Hi Jeremy,
Can you use the command below and send me the output, please?
Thanks,
Cindy
# mdb -k
::stacks -m zfs
ack! it *just* fully died. I've had our noc folks reset the machine
and I will get this info to you as soon as it happens again (I'm fairly
Hey folks!
We're using zfs-based file servers for our backups and we've been
having some issues as of late with certain situations causing zfs/
zpool commands to hang.
Currently, it appears that raid3155 is in this broken state:
r...@homiebackup10:~# ps auxwww | grep zfs
root 15873
11 matches
Mail list logo