>
> I used the following
> cd /
> find . \( \( -fstype nfs -o -fstype autofs \) -prune \) -o -print| egrep
> -v "^./proc|^./system|^./devices|^./dev|^./export/home|^./home|^./tmp"
> |cpio -oc > /export/home/oryx.cpio
>
> But that is only if you have zfs root and separate /var.
>
Another solution
instead of using a vnic - i shared real hardware: e1000g0 - and that seemed to
clear up the problem. i can ping up and down. i still may have made a typo or
something with the crossbow vnic setup or something else that i inadvertently
corrected when i switched to an actual hardware device or the
now i am having routing problems - on the global zone if i do an ifconfig:
init...@dogpatch:~$ ifconfig -a
lo0: flags=2001000849 mtu 8232
index 1
inet 127.0.0.1 netmask ff00
lo0:1: flags=2001000849 mtu 8232
index 1
zone csuite
inet 127.0.0.1 netmask ff00
e1000g0
ok, my mistake - i had used the same ip address for both the local and global
zone when i had a shared vnic. i had assumed they could be the same since the
loopback (127.0.0.1) was the same for both, and it appeared to be shared, as
well. using 2 different ip addresses cleared up the problem and
Unfortunately, exclusive-stack solaris10-branded zones aren't supported
yet. The zone will fail to configure and boot if you make it
exclusive-stack.
Jordan
On 01/11/10 06:22 PM, HeCSa wrote:
Hi!
On Mon, 2010-01-11 at 16:21 -0800, xx wrote:
i am having trouble getting rid of the warning:
Hi!
On Mon, 2010-01-11 at 16:21 -0800, xx wrote:
> i am having trouble getting rid of the warning:
> WARNING: skipping network interface 'vnic0_3' which may not be
> present/plumbed in the global zone.
>
> when i boot the zone - i get:
> init...@dogpatch:~$ pfexec zoneadm -z csuite boot
> WARNIN
i am having trouble getting rid of the warning:
WARNING: skipping network interface 'vnic0_3' which may not be present/plumbed
in the global zone.
when i boot the zone - i get:
init...@dogpatch:~$ pfexec zoneadm -z csuite boot
WARNING: skipping network interface 'vnic0_3' which may not be present
ok - that appears to work:
init...@dogpatch:/virtualbox# zoneadm -z csuite install -a /virtualbox/s10.cpio
-u
WARNING: skipping network interface 'vnic0_3' which may not be present/plumbed
in the global zone.
A ZFS file system has been created for this zone.
Log File: /var/tmp/csuite.insta
xx wrote:
init...@dogpatch:/virtualbox# zoneadm -z csuite install -a ./s10.cpio -u
WARNING: skipping network interface 'vnic0_3' which may not be present/plumbed
in the global zone.
A ZFS file system has been created for this zone.
Log File: /var/tmp/csuite.install_log.79aGOA
Error: Unknow
ok - i re-created the s10.flar:
# flar create -L cpio -n myflash /export/home/s10.cpio
Archive format requested is cpio
This archiver format is NOT VALID for flash installation of ZFS root pool.
This format is useful for installing the system image into a zone.
Reissue command without -L option to
xx wrote:
according to my notes, i create the flar with:
#flar create -n myflash /export/home/s10-.flar
i picked up the command on the video:
http://mediacast.sun.com/users/flippedbits/media/s10c-demo-jerry.swf
when i installed solaris 10 in virtualbox, i opted for a zfs file system:
Sun Mi
according to my notes, i create the flar with:
#flar create -n myflash /export/home/s10-.flar
i picked up the command on the video:
http://mediacast.sun.com/users/flippedbits/media/s10c-demo-jerry.swf
when i installed solaris 10 in virtualbox, i opted for a zfs file system:
Sun Microsystems Inc
Jerry Jelinek wrote:
xx wrote:
i installed virtualbox and installed solaris 10 from an iso download.
i used the flar command to create s10.flar as directed in:
http://hub.opensolaris.org/bin/view/Community+Group+zones/s10brand_dev_guide
i then tried to install s10.flar in the solaris 10 br
xx wrote:
i installed virtualbox and installed solaris 10 from an iso download. i used
the flar command to create s10.flar as directed in:
http://hub.opensolaris.org/bin/view/Community+Group+zones/s10brand_dev_guide
i then tried to install s10.flar in the solaris 10 branded zone:
init...@dogpat
there is no /zones/csuite as defined by the zonepath - doesn't install create
this?
--
This message posted from opensolaris.org
___
zones-discuss mailing list
zones-discuss@opensolaris.org
i installed virtualbox and installed solaris 10 from an iso download. i used
the flar command to create s10.flar as directed in:
http://hub.opensolaris.org/bin/view/Community+Group+zones/s10brand_dev_guide
i then tried to install s10.flar in the solaris 10 branded zone:
init...@dogpatch:~# zonead
On Tue, Dec 08, 2009 at 09:31:55AM -0800, xx wrote:
> i'm still not doing something right:
>
> init...@dogpatch:~# pkg install SUNWs10brand
> Creating Plan
> pkg: The following pattern(s) did not match any packages in the current
> catalog.
> Try relaxing the pattern, refreshing and/or examining t
you are right:
init...@dogpatch:~# pkg info -r "*" 2>&1 | grep brand
pkg://opensolaris.org/SUNWipkg-brand
pkg://opensolaris.org/SUNWs10brand
init...@dogpatch:~# pkg publisher
PUBLISHER TYPE STATUS URI
opensolaris.org (preferred) origin
On Tue, 08 Dec 2009 18:31:55 +0100, xx wrote:
> i'm still not doing something right:
>
> init...@dogpatch:~# pkg install SUNWs10brand
> Creating Plan
> pkg: The following pattern(s) did not match any packages in the current
> catalog.
> Try relaxing the pattern, refreshing and/or examining the c
i'm still not doing something right:
init...@dogpatch:~# pkg install SUNWs10brand
Creating Plan
pkg: The following pattern(s) did not match any packages in the current catalog.
Try relaxing the pattern, refreshing and/or examining the catalogs:
SUNWs10brand
init.
On 12/ 7/09 04:19 PM, xx wrote:
i am following the zonecfg script at the bottom of:
http://hub.opensolaris.org/bin/view/Community+Group+zones/s10brand_dev_guide
however i fail to create the SUNWsolaris10 zone:
init...@dogpatch:~# uname -a
SunOS dogpatch 5.11 snv_128a i86pc i386 i86pc
init...@do
i am following the zonecfg script at the bottom of:
http://hub.opensolaris.org/bin/view/Community+Group+zones/s10brand_dev_guide
however i fail to create the SUNWsolaris10 zone:
init...@dogpatch:~# uname -a
SunOS dogpatch 5.11 snv_128a i86pc i386 i86pc
init...@dogpatch:~# zonecfg -z xx
xx: No suc
22 matches
Mail list logo
