Hi all, XFree86 is apparently interoggating my monitor (Dell-1226h -Phillips inside) successfully, $> more +/DDC /var/log/Free86.0.log (II) MGA(0): I2C bus "DDC" initialized. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C Monitor info: 0x85de700 (II) MGA(0): Manufacturer: DEL Model: 7077 Serial#: 809710663 (II) MGA(0): Year: 1997 Week: 37 (II) MGA(0): EDID Version: 1.1 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) MGA(0): Sync: Separate Composite (II) MGA(0): Max H-Image Size [cm]: horiz.: 34 vert.: 25 (II) MGA(0): Gamma: 2.76 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605 (II) MGA(0): blueX: 0.150 blueY: 0.065 whiteX: 0.281 whiteY: 0.311 (II) MGA(0): Supported VESA Video Modes: (II) MGA(0): 720x400@70Hz (II) MGA(0): 640x480@60Hz (II) MGA(0): 640x480@75Hz (II) MGA(0): 800x600@60Hz (II) MGA(0): 800x600@75Hz (II) MGA(0): 1024x768@60Hz (II) MGA(0): 1024x768@75Hz (II) MGA(0): 1280x1024@75Hz (II) MGA(0): Manufacturer's mask: 0 (II) MGA(0): Supported Future Video Modes: (II) MGA(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) MGA(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) MGA(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) MGA(0): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) MGA(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) MGA(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) MGA(0): Supported additional Video Mode: (II) MGA(0): clock: 202.0 MHz Image Size: 340 x 255 mm (II) MGA(0): h_active: 1600 h_sync: 1904 h_sync_end 2096 h_blank_end 2160 h_border: 0 (II) MGA(0): v_active: 1200 v_sync: 1246 v_sync_end 1249 v_blanking: 1250 v_border: 0 (II) MGA(0): Serial No: 86385C0C4G97 (II) MGA(0): Monitor name: DELL D1226H (II) MGA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz, PixClock max 2550 kHz (II) MGA(0): end of I2C Monitor info but Im unable to successfully use those automatic/preset Monitor resolutions in this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 # Modes 720x400@70Hz # 640x480@60Hz 640x480@75Hz # 800x600@60Hz 800x600@75Hz # 1024x768@60Hz 1024x768@75Hz # 1280x1024@75Hz EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection btw - those modes were quoted How does one specify modes in a monitor section that are provided automatically by XFree86 ? or is this something for 4.1.x tia, jimc _______________________________________________ Seawolf-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/seawolf-list
