Hi! I'm using Redhat 7.3 with default kernel version 2.4.7-10 & two
build in network card which brand is SMC. Below is the output when i
type ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:30:AB:01:F4:41
inet addr:xxx.xxx.xxx.xxx Bcast:xxx.xxx.xxx.xxx
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:715431 errors:0 dropped:0 overruns:0 frame:0
TX packets:2713190 errors:0 dropped:0 overruns:0 carrier:0
collisions:5759 txqueuelen:100
RX bytes:239039791 (227.9 Mb) TX bytes:205402003 (195.8 Mb)
Interrupt:5 Base address:0xd000
eth1 Link encap:Ethernet HWaddr 00:50:BF:94:BD:D1
inet addr:192.168.10.1 Bcast:192.168.10.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:569985 errors:70 dropped:0 overruns:0 frame:74
TX packets:0 errors:161464 dropped:0 overruns:0 carrier:319669
collisions:0 txqueuelen:100
RX bytes:55468243 (52.8 Mb) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0xa000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:118 errors:0 dropped:0 overruns:0 frame:0
TX packets:118 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7766 (7.5 Kb) TX bytes:7766 (7.5 Kb)
What my question is why my eth1 get an errors :70 & TX bytes:0 ?
--
Thanks & Regards,
Jason Lim
_______________________________________________
Seawolf-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/seawolf-list
