You just have to configure ARP properly. For example----
Internet Router Firewall End User 10.1.1.254 10.1.1.58 192.168.1.1 192.168.1.51 You could use NAT on the firewall to hide everyone behind the IP address 10.1.1.1. Then you would have to configure the firewall to respond to arp requests for 10.1.1.1, or you would have to configure the internet router with a static arp entry for 10.1.1.1. But no one ever needs to know the actual IP address of the firewall. FWIW, Eric Schroeder Satel Corporation Bill Hamel <[EMAIL PROTECTED]> 11/15/2002 08:42 PM To: Meritt James <[EMAIL PROTECTED]> cc: [EMAIL PROTECTED], <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> Subject: Re: Company Firewall's IP Address Then routing wise, how do the packets find their way back to the firewall if they don't know the source IP ? ? On Fri, 15 Nov 2002, Meritt James wrote: > Such is not the case. I've done otherwise. > > Bill Hamel wrote: > > > > Unless I am missing something in the question, no matter what you do, > > what/whoever you connect to through a firewall will always know the IP > > address of the the trusted interface of the firewall. > > > > -bh > > > > On Wed, 13 Nov 2002, Meritt James wrote: > > > > > "an" IP Address - not necessarily the originating individual. There are > > > a LOT of ways around that. > > > > > > Jim > > > > > > [EMAIL PROTECTED] wrote: > > > > > > > There is nothing new about finding your IP Address and display it on the web page. > > > > > > -- > > > James W. Meritt CISSP, CISA > > > Booz | Allen | Hamilton > > > phone: (410) 684-6566 > > > > > -- > James W. Meritt CISSP, CISA > Booz | Allen | Hamilton > phone: (410) 684-6566 >