I hope I am not picking you up wrong again but maybe Etterape might give some you some help. It is a freeware project that shows real-time network traffic so you can look at the source code and maybe within that find your answer. Also look for Etherman and have a look at that.
http://etherape.sourceforge.net/ If I have it wrong again then my apologies. Trevor Cushen Sysnet Ltd www.sysnet.ie Tel: +353 1 2983000 Fax: +353 1 2960499 -----Original Message----- From: Burton M. Strauss III [mailto:[EMAIL PROTECTED] Sent: 09 March 2003 22:09 To: swin; [EMAIL PROTECTED] Subject: RE: Any good method to check network overload? NOTHING will work. Everything I've ever read says that if you really look into network traffic and behavior, you'll find that the patterns are fractal. The best you could do is to use the counters built into the sequence of remote devices between the points you want to measure. That won't work because most of them won't make their data available to an outsider. So you're out of luck. Anything else you do is all but doomed to fail. At best, you can simulate ONE particular set of network traffic (be it ICMP or a http: connection to a host) or whatever. And all that that means is that that particular set of network traffic has a specific response. Since any and all traffic can have different QoS and handling (delays, differential routing, even different servers acting as the end-points), you simply can't tell - remotely - about anything other than what you simulate. Plus, you have the observer effect - your simulated load might be what forces a specific link to invoke a back-off procedure or to drop packets - and the affected data might not be proportionally from your simulated load. -----Burton -----Original Message----- From: swin [mailto:[EMAIL PROTECTED] Sent: Saturday, March 08, 2003 12:54 AM To: [EMAIL PROTECTED] Subject: RE: Any good method to check network overload? You all misunderstood me! what I want isn't a tool to check network flow or just want to have it report. I'm doing a research to find a good model to judge if network is overload automaticlly,it may be a good algorithm but not a tool.no matter to use ntop or mrtg, it just give a statistic of network flow, this is not hard to achive.but my problem is how to judge network overload in real-time and offer a countermeasure ,but not a monitor tool. David give a suggestion to check time delay in pinging,but I think this is not reliable.as we known ,we can get the data in realtime just like intop can do,but with this data how can we say at certain time the network is overloaded ,what we need is a benchmark to decide if it is overloaded, but what should this benchmark be and how to get this benchmark are the problems. I don't know if I have explain it clearly,but I do holp get suggestions of it form others. Swin. Wang. ****************************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this message in error please notify SYSNET Ltd., at telephone no: +353-1-2983000 or [EMAIL PROTECTED] ******************************************************************************