Looked at use of @DataAmount(DataAmount.BITS) also. Not sure if it's fits. The output is displayed in units like "KiB" - not the normal when examining key lengths used in X509Certificates. i.e a 2048 bit key gets displayed as "2 KiB" - I'd prefer to keep the 2048 display version.
new webrev at: http://cr.openjdk.java.net/~coffeys/webrev.8148188.v4/webrev/ Regards, Sean. On 28/06/18 17:59, Seán Coffey wrote:
Comments inline. On 28/06/2018 17:20, Erik Gahlin wrote:It's sufficient if an event object escapes to another method (regardless if JFR is enabled or not).Some more feedback: Rename event jdk.CertChain to jdk.CertificateChain Rename event jdk.X509Cert to jdk.X509Certificate Rename field certChain to certificateChain. Rename field serialNum to serialNumberall above done.Rename field algId to AlgorithmicId or AlgorithmicIDmaybe "algorithm" works here also ?Rename @Label("Ciphersuite") to @Label("Cipher Suite") Rename @Label("Cert Chain") to @Label("Certificate Chain")Rename @Label("Property Name") to "Name" or "Key" if that makes sense in the context?Rename @Label("Property Value") to "Value".Put events in a subcategory, i.e @Category({"Java Development Kit", "Security"})done.Make classes final.done. I had thought that the JFR mechanism required non-final classes.What is the unit of the key in X509Certificate event? Bits? If that is the case, use @DataAmount(DataAmount.BITS)Yes - it's essentially the bit length of the keys used. Let me look into that annotation usage.@Label("Serial numbers forming chain of trust") should not be a sentence. How about "Serial Numbers"?I think we're always going to have some ownership issues when tests serve a dual purpose. I still think it makes sense to keep the test logic in one place. Any failures in these tests will most likely be owned by security team. (moving the tests to security directory is also an option)I think the tests are hard to read when two things are tested at the same time. It is also likely that if a test fail due to logging issues, it will be assigned to JFR because of the test name, even thought the issues is not JFR related.Let me check if there's any common patterns that could be added to the testlibary.If you want to reuse code between tests, I would put it in testlibrary.Thanks, Sean.ErikThanks for the update Erik. By default I'm proposing that the new JFR Events and Logger be disabled. As a result the event class shouldn't escape. If performance metrics highlight an issue, we should revisit.regards, Sean. On 27/06/2018 20:57, Erik Gahlin wrote:On 2018-06-27 21:14, Seán Coffey wrote:On 27/06/2018 19:57, Xuelei Fan wrote:This is a requirement from the JFR framework. All their event.isEnabled calls are instance methods and follow a similar pattern. The JFR team assure me that the JIT can optimize away such calls.Hi Sean, I may reply in several replies. PKIXMasterCertPathValidator.java -------------------------------- + CertChainEvent cce = new CertChainEvent(); + if(cce.isEnabled() || EventHelper.loggingSecurity()) { + String c = reversedCertList.stream() + .map(x -> x.getSerialNumber().toString(16)) + .collect(Collectors.joining(", ")); + EventHelper.commitCertChainEvent(cce, c); + }No matter the event or the JFR mechanism is enabled or not, the above code will create a new instance. Is the return value of cce.isEnabled() dynamically changed or static?The JIT will most likely not be able to optimize if the event class escapes.From a JFR perspective, this would be the preferred layout: EventA eventA= new EventA(); eventA.value = this.value; eventA.commit(); and then do logging separately: System.Logger.log(DEBUG, this.value) With this layout, the JIT will remove the allocation and dead store.If it is expensive to gather the data for the event, like the CertChainEvent above, the following pattern should be used.EventB eventB= new EventB (); if (eventB.shouldCommit()) { eventB.value = calculateValue(); eventB .commit(); }If JFR is not enabled, shouldCommit returns false and the JIT should be able to remove the allocation. This will be best from a performance point of view, and also in my opinion from a maintenance and readability perspective. Others may disagree.ErikI was initially hoping to concentrate on just JFR events but I got strong feedback to also consider use of Logger (esp. in cases where the jdk.jfr module is not available)Is there a need to support both logging and JFR? I'm new to record events. I did not get the point to use both.regards, Sean.Thanks, Xuelei On 6/26/2018 3:18 PM, Seán Coffey wrote:Erik,I rebased the patch with TLS v1.3 integration today. I hadn't realized how much the handshaker code had changed. Hopefully, I'll get a review from security dev team on that front.Regards the JFR semantics, I believe the edits should match majority of requests . I still have a preference for the test infra design for these new logger/JFR tests used in version 1 of webrev. I think it makes sense to keep the test functionality together - no sense in separating them out into different components IMO. Also, some of the edits to the JFR testing were made to test for the new dual log/record functionality. I might catch up with you tomorrow to see what the best arrangement would be.http://cr.openjdk.java.net/~coffeys/webrev.8148188.v2/webrev/ regards, Sean. On 25/06/2018 21:22, Seán Coffey wrote:Many thanks for the review comments Erik. Replies inline. On 24/06/2018 14:21, Erik Gahlin wrote:Hi Sean,Some of the changes in the webrev belongs to JDK-8203629 and should be removed for clarity.Some initial comments: default.jfc, profile.jfr:The events should not have control="enable-exceptions". The purpose of the control attribute is so to provide parameterized configuration of events for JMC. As it is now, the security events will be enabled when a user turns on the exception events.Makes sense. I'll remove that parameter.The CertificateValidity class operates on Date Object values. I'll work with the Date.getTime() method then (and update the Logger formatting)X509CertEvent:You should use milliseconds since epoch to represent a date instead of a string value, i.e.@Label("Valid From") @Timestamp(Timestamp.MILLISECONDS_SINCE_EPOCH) public long validFrom; @Label("Valid Until") @Timestamp(Timestamp.MILLISECONDS_SINCE_EPOCH) public long validUntil;Yes - that looks like the wrong Description. I'll review all of these fields.This following annotation adds little value @Description("Details of Security Property")I would either remove the annotation, or provide information that helps a user understand the event. For instance, what is X509, and what kind of certificates are we talking about?Yes - Open to suggestions. "Security" sounds like a good suggestion.@Category("Java Application")I'm a bit worried that we will pollute the "Java Application" namespace if we add lots of JDK events in that category. We may want to add a new top level category "Java Development Kit", analogous to the "Java Virtual Machine" category, and put all security related events in subcategory, perhaps called "Security".I'll take a look at that pattern again. I've separated out the current tests into an (a) outer test to analyze the logger output and (b) the inner test which checks for JFR correctness. I did include extra logic to make sure that the EventHelper configuration was working correctly. "Events.assertField" looks very helpful. Thanks for the pointer.@Label("X509Cert")The label should be human readable name, with spaces, title cased etc. I would recommend "X.509 Certificate". In general, avoid abbreviations like "certs" and instead use labels such as "Certificate Chain". The label should be short and not a full sentence.For details see, https://docs.oracle.com/javase/10/docs/api/jdk/jfr/Label.htmlI think it would be good to separate testing of JFR and logging into different files / tests. I would prefer that the test name is the same as the event prefixed with "Test", i.e TestX509CertificateEvent, as this is the pattern used by other JFR tests.Let me take on board the suggestions below and get a new webrev out on Tuesday.regards, Sean.I reworked one of the tests to how I like to see it: /* * @test * @key jfr * @library /test/lib* @run main/othervm jdk.jfr.event.security.TestX509CertificateEvent*/ public class TestX509CertificateEvent { private static final String CERTIFICATE_1 = "..."; private static final String CERTIFICATE_2 = "...";public static void main(String... args) throws CertificateException {Recording r = new Recording(); r.enable(EventNames.X509Certificate).withoutStackTrace(); r.start();CertificateFactory cf = CertificateFactory.getInstance("X.509"); cf.generateCertificate(new ByteArrayInputStream(CERTIFICATE_1.getBytes())); cf.generateCertificate(new ByteArrayInputStream(CERTIFICATE_2.getBytes()));// Make sure only one event per certificatecf.generateCertificate(new ByteArrayInputStream(CERTIFICATE_1.getBytes())); cf.generateCertificate(new ByteArrayInputStream(CERTIFICATE_2.getBytes()));r.stop(); List<RecordedEvent> events = Events.fromRecording(r);Asserts.assertEquals(events.size(), 2, "Expected two X.509 Certificate events");assertEvent(events, "1000", "SHA256withRSA", "CN=SSLCertificate, O=SomeCompany", "CN=Intermediate CA Cert, O=SomeCompany", "RSA", 2048); assertEvent(events, "1000", "SHA256withRSA", "CN=SSLCertificate, O=SomeCompany", "CN=Intermediate CA Cert, O=SomeCompany", "RSA", 2048); }private static void assertEvent(List<RecordedEvent> events, String certID, String algId, String subject, String issuer, String keyType, int length) throws Exception {for (RecordedEvent e : events) { if (e.getString("serialNumber").equals(certID)) { Events.assertField(e, "algId").equal(algId); ... return; } } System.out.println(events);throw new Exception("Could not find event with Cert ID: " + certID);} }The reworked example uses the Events.assertField method, which will give context if the assertion fails. Keeping the test simple, means it can be analyzed quickly if it fails in testing. There is no new test framework to learn, or methods to search for, and it is usually not hard to determine if the failure is product, test or infrastructure related, and what component (team) should be assigned the issue. The use of EventNames.X509Certificate means all occurrences of the event can be tracked done in an IDE using find by reference.Thanks ErikFollowing on from the recent JDK-8203629 code review, I'd like to propose enhancements on how we can record events in security libs. The introduction of the JFR libraries can give us much better ways of examining JDK actions. For the initial phase, I'm looking to enhance some key security library events in JDK 11 so that they can be either recorded to JFR, logged to a traditional logger, or both.Examples of how useful JFR recordings could be can be seen here :http://cr.openjdk.java.net/~coffeys/event_snaps/X509Event_1.pnghttp://cr.openjdk.java.net/~coffeys/event_snaps/securityProp_1.png http://cr.openjdk.java.net/~coffeys/event_snaps/securityProp_2.pnghttp://cr.openjdk.java.net/~coffeys/event_snaps/TLSEvent_1.pngsecurityProp_2.png gives an example of how the JFR recording can be queried to quickly locate events of interest (in this case, code setting the jdk.tls.* Security properties). I still need to clean up the TLSEvents testcase to improve test coverage and hope to do that in coming days.JBS record : * https://bugs.openjdk.java.net/browse/JDK-8148188webrev : http://cr.openjdk.java.net/~coffeys/webrev.8148188.v1/webrev/