Simply configure eth1 during the install process .. You might need a proprietary microcode for the pppoe modem ... and then configure it with the web interface ... but this should have nothing to do with ipsec ...
>"=?iso-8859-1?Q??=" <[EMAIL PROTECTED]> writes: > Hi, > > >It works fine here. Maybe you don't configure correctly your network > >during the install or maybe there is something else. I have tested here > >and it works without a problem. > > > >> Then I must do a shorewall clear to connect from another computer to > >> configure the firewall ... And when it restart the shorewall with the "new > >> config",.. It's "broken" again,.. I must do again a shorewall clear... And > >> again, ... > > Hi, > >> Well, ... I don't know why,... When I install the MNF2, (english & french), > >> In setup eth1 is "local" with "local ip" (192.168.x.x)... Then I restart > >> 1rst time... Always I have the ipsec wrong in startup, and squid wrong in > >> startup... > > > >It works fine here. Maybe you don't configure correctly your network > >during the install or maybe there is something else. I have tested here > >and it works without a problem. > > Could you tell me please wh > at I need > to configure during the install & how ? > > my box : > eth0 --> wan (internet ) ---- > connection via PPPoE > eth1 --> lan (local) ---> 192.168.1.1 > > if I understand correctly , during the install, I must only install only the eth1 > ... I try to install the eth0 with PPPoE but it seems not to work.... (no > connection...) > > Sorry for the disturb, and many tks to you, Florin, for the help... ! > -- Florin http://www.mandrakesoft.com http://people.mandrakesoft.com/~florin/
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
