Hi there,

in MNF2 you are not supposed to change the security level. MNF2 is set as
default to the paranoid level. Forget about everything you have tried with
netstat, etc (use netstat -an |grep LISTEN). Also, you are supposed to try
shorewall clear and not shorewall stop because it's not the same thing ...

I don't know what else I can say here because I don't seem to find any
other relevant information in your mail ...

good luck,


>Manuel Acevedo Chavira <[EMAIL PROTECTED]> writes:

>       Hi, thanks for you advise, but the problem is that i tried this, with
> shorewall stop i just can ping from
>       the client, but i can't to initialize the back end, at the begining i 
> was
> looking for some error in the logs files
>       and i found in /var/log/auth.log
> 
>               sshd[3238]: Received signal 15; terminating
>               sshd[4692]: Server listening on :: port 22
>               sshd[4692]: error: Bind to port 22 on 0.0.0.0 failed
>                               Adress already in use
> 
>       and then i changed in /etc/ssh/sshd_config to add the line
>               ListenAdress 0.0.0.0
> 
> 
>       and the problems in sshd was out, whitout this change netstat -ln show 
> in
> sshd
> 
>               Proto   Recv-Q  Send-Q  Local Adress    Foreign Address State
> 
>               tcp     0               0               :::22                   
> :::*                    LISTEN
>               tcp     0               0               :::8443         :::*    
>                 LISTEN
> 
>       and whith this change netstat -ln show in sshd
> 
>               Proto   Recv-Q  Send-Q  Local Adress    Foreign Address State
> 
>               tcp     0               0               0.0.0.0:22              
> 0.0.0.0:*                       LISTEN
>               tcp     0               0               :::8443         :::*    
>                         LISTEN
> 
>       and the error log don't show any more, for that i thinked that is a 
> problem
> with 8443, i disable ipv6
>       in modprobe.conf adding
>               alias net-pf-10 off
>               alias ipv6      off
> 
>               after netstat -ln show
> 
>               Proto   Recv-Q  Send-Q  Local Adress    Foreign Address State
> 
>               tcp     0               0               0.0.0.0:22              
> 0.0.0.0:*                       LISTEN
>               tcp     0               0               0.0.0.0:8443    
> 0.0.0.0:*                       LISTEN
> 
> 
>               and the same problem from the client i can't to see the back 
> end, then i
> back the initial configuration
>               because i installed in another pc the MNF beta 2, and my 
> sorprise was, all
> right!!!!!!! whitout changes, i can           see the
>               back end, then i reinstall the MNF in the pc with the problem, 
> but :(, the
> same problem, it's very confused
>               i don't understand what's the problem, in this pc i have been 
> installed
> the fisrt MNF and all right, and with
>               the new MNF i don't see the back end, in both cases i choose 
> security
> nevel to estandar.
> 
>               thanks very much, i hope you can understand me, and excuse me 
> for my
> english
> 
> 
> -----Mensaje original-----
> De: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] nombre de Dieter
> Sch�tze
> Enviado el: Viernes, 14 de Enero de 2005 04:15 p.m.
> Para: [email protected]
> Asunto: Re: [Security Firewall] MNF2 NETA don't start from web
> 
> 
> 
> Am Freitag, den 14.01.2005, 13:25 -0600 schrieb Manuel Acevedo Chavira:
> >     Hi, last month i installed the new MNF beta 2 but i can't to see the web
> > page from
> >     any client with https://192.168.1.20:8443  and i don't know what's
> > happening.
> >     in /etc/httpd/logs-naat/httpd2-naat.ssl_error_log shows
> >
> >     [warn] RSA server certificate CommonName (CN) 'localhost.ai4h3R' does 
> > NOT
> > match server name!?
> >
> >     any ideas?
> logon direct on the Konsole change to su.
> stop the shorewall with service shorewall stop.
> Now test it from the client ones more.
> Configure your MNF and restart, if you have everything correct
> configured you can logon from the client again.
> 
> The certificate is the standard certificate thats normal with
> localhost.xxxx you can make a better certificate if you want, but no
> real certificate without paying. ;-)
> 
> Dieter
> 
> 
> 
> ____________________________________________________
> Want to buy your Pack or Services from MandrakeSoft? 
> Go to http://www.mandrakestore.com
> Join the Club : http://www.mandrakeclub.com
> ____________________________________________________

-- 
Florin                          http://www.mandrakesoft.com
                                http://people.mandrakesoft.com/~florin/

____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________

Reply via email to