---------- Forwarded message ---------- From: Lars Ottemoller <[email protected]> Date: Wed, Oct 27, 2010 at 1:45 PM Subject: Re: Fwd: Please mail to Seisan Group To: Santosh Kumar Sundriyal <[email protected]> Cc: Jens Havskov <[email protected]>
Dear Santosh, it is better to do the decimation in sac as it uses digital filters. You can decimate in Seisan, but then analogue filters are used. Regards, Lars On 27/10/10 09:40, Santosh Kumar Sundriyal wrote: > Sir > I am using the program called /xspmft.f / > written by R. B. Herrmann. A detail is given below (as in Surface manual > of seisan). However I have solved the problem by converting the data > (100 SPS) in SAC format and then decimating there by factor 5 i.e > converting in 20 SPS. > Just want to know if this facility is there in Seisan? > Will it lose some information for period 10-25 sec. ( teleseismic events) > warm regards > Santos Kumar. > *details of Multiple Filter Analysis using xspmft.f* > > One of the methods available for calculating group velocities is the > Multiple Filter > > Technique (MFT). This technique is applied on multiply dispersed signals > to isolate > > group velocities as a function of time. There exist numerous computer > programs to > > accomplish this. *Here, the program called * > > /*xspmft */*written by R. B. Herrmann is used.* > > The program is controlled from a command line with several options. Of > the available > > options, only three are used here (A description of other options can be > found in the > > full manual written by R. B. Herrmann) > > To run the program, two input files are required. One contains the > waveform file > > (spectral amplitudes) prepared in stage (I), and the second contains the > frequencies / > > periods for which the group velocities will be calculated ( i.e. filter > centre frequencies > > / periods). An example of the command to run the program is given below. > > / > > xspmft –v –V –C xspm.d < com_spec.out > > / > > where, > > / > > xspm.d > > /is an input file containing the filter centre frequencies/ > > com_spec.out > > /is the file containing the spectral amplitude data from stage (I)/ > > -v > > /is an option to have the spectral amplitudes annotated/ > > -V > > /is an option to create an ASCII output file containing the dispersion > data/ > > -C > > /xxxx is an instruction to read the filter centre frequencies from the > file xxxx > > (where xxxx is xspm.d in the example given above) > > > On Tue, Oct 26, 2010 at 3:26 PM, Jens Havskov <[email protected] > <mailto:[email protected]>> wrote: > > > santosh > > which program are you trying to recompile ? > > jens > > On Sun, 24 Oct 2010, Santosh Kumar Sundriyal wrote: > > > Dear Sir, > > I am doing doing Multi Filter Analysis using code xspmft.f and > following > Short Manual of Surface Wave Group Velocity Inversion. In the > xspmft.f code > , the number of points in FFT and - the number of frequencies > are 1024 and > 513 fixed respectively ( a program by Hermann) . In our work > of spectral > analysis we are using surface waves (i.e. Rayleigh,Love wave) > the window > length is very long and getting these two parameters are 8192, 4097 > respectively in the com_spec.out file. I have tried to > recompile the > program in Sun system with changing these two parameters but > code is not > running. and error message comes. Please suggest me how could we > fixed these values as a code given for > distant earthquake or how we could recompile properly, > With Regards, > > Santosh Kumar > ISR, Gandhinagar, Gujarat, > India > > > > > -- > Santosh Kumar > ISR,Gandhinagar. > > > > > -- > Santosh Kumar > ISR,Gandhinagar. > -- Lars Ottemøller Associate Professor Department of Earth Science University of Bergen Allegt. 41 5007 Bergen NORWAY Phone +47 5558 2616 -- Santosh Kumar ISR,Gandhinagar.
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
