Antonio:

This is an excellent question.

One option: gmew in Earthworm can calculate PGA, PGV etc. in real time for
events. To use gmew you will need to convert your dataless to SAC PZ files
and then manually create pz files for use by gmew.

Here is the procedure:

Generate dataless volumes with PDCC (Download:
http://www.iris.edu/software/pdcc/)

Make SAC PZ files from the dataless using rdseed (Download:
http://www.iris.edu/forms/rdseed_request.htm)

./<rdseed_directory>/rdseed -pf <dataless filename>

cat the output from rdseed, confirm the INPUT UNIT is M (meters), and copy
the POLES, ZEROS and CONSTANT from the bottom of the SAC PZ file to a new
file named: [STATION]_[COMPONENT]_[NETWORK].pz

save the .pz file to a new directory (it can be located in Earthworm's
param's folder for instance).

Now, the "CONSTANT" value needs to be converted to nm by dividing by 1E+09.

If you would like I can send you example SAC PZ, pz and gmew.d files.


I do not know of any software that will convert ascii raw to ascii
corrected.

Keep in mind that miniseed, sac, seisan, ascii are all raw waveform file
formats. None contain corrected data (data with the instrument response
removed). The correction is, traditionally, the role of the software
package. Therefore, KMI and Reftek programs should have internal functions
to read response files and run the corrections. If not, OSOP can write you
a program to accomplish this.


Kind Regards,


*Branden C. Christensen*
Director, OSOP
*[email protected]*
www.osop.com.pa
Volcan, Panama





---------- Forwarded message ----------
From: AAbrego <[email protected]>
Date: Fri, Sep 28, 2012 at 2:48 PM
Subject: [seisan] uncorrected records from SEISAN
To: "[email protected]" <[email protected]>


 Dear all:****

** **

Not sure if this is the proper forum for my question but I’ll give it a try.
****

** **

I have several accelerographs attached to my SC3 and EW. The records
obtained for a given event are converted to ASCII data using SEISAN as the
interface (from miniseed into SEISAN and then to ASCII); or if the event
was detected by EW, I skip the miniseed step and go directly from SEISAN to
ASCII. You might ask why don’t I get the data directly from the
accelerograph in its native format. I do that as well but for various
reason I’m trying to go this other way (we are testing a dam for vibration
and have several equipment recording the process; all of them are attached
to SCP3 so they can record the test in real time. In addition physically it
is impossible to trigger all equipments manually so it is much better to do
a scart in SCP3 and retrieve the test for post processing).****

** **

Anyway, when getting the records in ASCII format I obtain them as
uncorrected records. I guess my question would be, how can I applied the
baseline and instrument correction to this type or records, so I can
process them and obtain PGA, spectra and that kind of stuffs?  ****

** **

For instance, I use Kinemetrics and the software SMA reads the ASCII file
but since the ASCII file is generated without any instrument response the
program simply cannot process beyond a certain point. The same is true for
other type of accelerographs that we use.****

** **

I’m in the process of asking Kinemetrics and REFTEK directly if there is a
way the software can read the instrument response from a separate file but
in the mean time I would like to know if anyone in the list has come across
a similar situation and know how to solve it.****

** **

Regards,****

** **

*Antonio A. Abrego M.*

Ingeniero Civil****

Unidad de Ingeniería Geotécnica****

División de Ingeniería****

Tel. 276-1989****

E-Mail: *[email protected]* <[email protected]>****

** **

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to