SEISAN can work with GCF files directly but each must be listed in
S-file. and most of the time a def file is needed to get proper channel
names.
jens
On Tue, 12 Mar 2013, Carpenter, Seth wrote:
Hi,
I think that you can accomplish this a couple of different ways, but I do not
know to what extent SEISAN can work with gcf data files - it could be that you
need to convert these to another format (e.g. mseed, sac, seisan, etc.) before
proceeding. I would recommend reading about gursei, because this program may
accomplish what you want. I'll continue assuming you know whether or not you
need to convert these data first.
The first method involves registering one of the files as an event and add the
remaining wavefiles to this event in eev:
1) view one trace with mulplt and then typing "p" to register it in a SEISAN
database.
2) copy all traces to the $SEISAN_TOP/WAV directory.
3) open the database with eev: eev 201207 and find this event.
4) edit the S-file by typing "e" when you're on the appropriate event number.
5) add new wavefile lines in the S-file by mimicking the #6 line which contains
the name of the waveform you previously registered.
So, when this is finished, your #6 lines, if the gcf data does not need to be
converted, in the S-file should look like:
20120704_160144_5434_T4K7E4.gcf 6
20120704_160144_5434_T4K7N4.gcf 6
20120704_160144_5434_T4K7Z4.gcf 6
If you type "po" for this event in eev, you'll see all three components
simultaneously.
The second method involves using seisei to combine the data into a single
seisan wavefile:
1) make a filenrs.lis file of the desired files: dirf
20120704_160144_5434_T4K7*.gcf
2) Convert these wavefiles to seisan format (gursei?)
3) Combine these wavefiles to a single seisan wavefile using seisei
Because I'm not familiar with gcf format, some additional steps may be
necessary or extraneous in my lists.
I hope one of those methods works for you.
Cheers,
Seth
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of
[email protected]
Sent: Monday, March 11, 2013 4:59 PM
To: [email protected]
Subject: [seisan] Azimuth of arrival from 3-component stations, h(Azim)
Dear SEISAN users
I am using SEISAN for the first time and I want to find the azimuth from a
3 components station. Data is in GCF Guralp format in WORK directory, so in
filenr.lis I have:
# 1 20120704_160144_5434_T4K7E4.gcf
# 2 20120704_160144_5434_T4K7N4.gcf
# 3 20120704_160144_5434_T4K7Z4.gcf
I don't know how to manage the 3 components at the same time. When I use
MULPLT, I just can select and plot one component. If I make
MULPLT
filenr.lis
files are sent to print but any plot is show in the screen.
I would also like to know if I can convert gcf format to an S-file in order to
use EEV.
Best regards
Jorge
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan