Hello again

I ask in a simpler way using example:

If model in station0.hyp looks like
  6.2       0.0
  6.6      12.0
  7.1      23.0      
  8.05     31.0      
  8.25     50.0
  8.5      80.0 
that means:
above 0 km - 6.2 km/s
0 - 12 km    - 6.6 km/s
12-23 km    - 7.1 km/s
23-31 km    - 8.05 km/s
31-50 km    - 8.25 km/s
50-80 km    -8.5 km/s
or 
0 - 12 km    - 6.2 km/s
12-23 km    - 6.6 km/s
23-31 km    - 7.1 km/s
31-50 km    - 8.05 km/s
50-80 km    - 8.25 km/s
below 80 km - 8.5 km/s

???

Grazyna



Od: [email protected]
Do: [email protected]; [email protected]; 
Wysłane: 14:21 Wtorek 2013-12-10
Temat: [seisan] layer model -depth to top or bottom?

> Hello
> 
> I'm not sure if the depth in layer model in station0.hyp is taken to top or 
> to bottom of the layer.
> According to hypocenter documentation page 18 (4.1.3 Layered Velocity Model 
> Parametres) it is "Depth to bottom of layer in km" and I treated it so till 
> now.
> But the Velest program take the depth to the top, "upper interface of the 
> velocity layer in km", according to Velest users guide page 2, 6.3 Content of 
> the velocity model file.
> How shoud I define the model in station0.hyp to both programs Hyp and Velest 
> take it correctly?
> 
> Regards
> Grażyna Holeczek
> 
> 
> _______________________________________________
> seisan mailing list
> [email protected]
> http://mailman.uib.no/listinfo/seisan
> 




_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to