Hi Shawn,

Please let us know which digitizer you are using.

The sensor part of your Episensor (assuming +/-20 Volt differential) RESP file 
looks ok, but the sensitivity of the digitizer (and your amplifier if you use 
one) will control the measured ground displacement.

In SEISAN you can use the RESP program to generate new response files.
Or you can use PDCC and RDSEED to make new RESP files:
http://ds.iris.edu/ds/nodes/dmc/software/downloads/pdcc/
http://ds.iris.edu/ds/nodes/dmc/manuals/rdseed/

Good luck,
Peter


Fra: [email protected] [mailto:[email protected]] På vegne af 
Boltz, Meagan S. (CDC/NIOSH/OMSHR)
Sendt: 14. april 2015 23:43
Til: [email protected]
Emne: [seisan] Episensor ES-T Instrument Response File

Hello,

I am new to SEISAN and am using version 10.3 on Windows 7 64-bit.  I am trying 
to find appropriate instrument response files for an Episensor FBA ES-T (0.25g, 
20 V) and a Sercel L4C (5500 ohm) for use in calculating magnitudes with 
SEISAN.  I have tried using the SEED instrument responses for these instruments 
found on the IRIS website 
(http://ds.iris.edu/NRL/sensors/kinemetrics/RESP.XX.NS215..BNZ.Episensor.DC_200.20VDF.0_25G
 and 
http://ds.iris.edu/NRL/sensors/sercel/RESP.XX.NS155..SHZ.L4C.5500.8905.1.171), 
but for an event that should have an ML on the order of a 1 or 2, I am getting 
an ML of 8.9 and SEISAN is reporting amplitudes between 1 and 10 meters.  Are 
there more appropriate instrument response files that I should be using for 
these instruments in SEISAN, or is there a difference in the formatting that I 
should be aware of?

Thank you,
Shawn
_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to