tom

On Wed, 29 Jul 2015, Sickbert, Tim wrote:


Greetings.

    We are working to set up an earthquake seismology research lab
at Oklahoma State University. A brief inspection of available data
showing a rapid increase in seismic activity in north-central
Oklahoma since about 2009 would show our motivation (figure
below). We have ten broadband triaxial seismographs (Guralp
CMG-6TDs) rather densely deployed (long axis of the research area
is about 100 km) in north-central Oklahoma.  Our instruments are
offline: they are logging data and we have to visit the stations
to collect them. In addition we are using data from the USGS and
Oklahoma Geological Survey (OGS) available through IRIS. Thus we
want to analyze raw waveform data from about twenty seismic
stations to locate, and analyze all earthquakes possible.



    We had been using Seismic Handler (SHM) to pick onsets and
analyze events but we are not entirely satisfied with it. OGS and
others have recommended SEISAN. I have worked through most of the
tutorial with the embedded TEST data, and some of the training
(seitrain.pdf) with the additional data. I very much like what
SEISAN can do. The documentation, however, does not seem to me to
directly address our application. Ideally, we want to
simultaneously display fractions of 24-hour-long continuous
waveform files from about twenty stations, zoom in on shorter time
segments, pick onsets, locate and analyze events, determine
magnitudes and maybe moment tensors, and save the appropriate
S-files for cataloging and further analyses.



    I have been able to load individual miniSEED files into
MULPLT. However, I have not yet been able to load more than one of
our continuous waveform files at a time. My reading of
?seisan.pdf,? ?seisan-tutorial.pdf,? and ?seatrain.pdf? lead me to
think that I have to build BUD or SeisComP archives for SEISAN to
access the data. The SEISAN documentation regarding these archives
also seems to imply that they are event-oriented, unlike our
situation where we want to manually, visually, perform the initial
analyses of the continuous waveform files.



    Thus I have a few questions:

1)      Is SEISAN appropriate for what we are trying to do?


 you should be able to do all of what you mention above

2)      Do the documents I have clearly present the information I
need to set up the database(s) for our application?

it is there, but maybe a bit hidden here and there

3)      Do I need to archive our data into BUD or SeisComP to be
able to use it?


that would be the easiest way. the only probelm is making the structure and the day files. chad trabant has a program, msrouter, to do that, see seisan manual 5.3.1. we have a version of the program which also makes SeisCompP structure. see manual 2.2.3 for a description on how to use and set up the archive. once the data is archived, you can display all or some channels, see examples 1.8.5 and 1.8.6 in the training document.

you can now mnaully go through the data, window by window, archive the intesting sections as events and thereby create the data base.

you can also autodetect the events from the archive using program condet, see exercise 10.1 in training document.

it is possible to always work directly with the archive and the s-files only have a reference to the archive. we recommend however to extract out the waveform files corresponding to the events and put them in the seisan structure. this can be done automatically with mulplt when registring the event. for futire work, it much easier not having always to deal with the large archive.


> 4)      Do you have any other or additional recommendations on how > we should manage our data to make it available to SEISAN
(especially MULPLT)?

see above. not sure there is anything special to say about mulplt. if you have a lot of data you might want to autopic the amplitudes for Ml and spectral level for Mw, use autopic for that.

jens


>

Thanks!



Tim









[IMAGE]



Tim Sickbert

Devon Labs Coordinator

Boone Pickens School of Geology

105 Noble Research Center

Oklahoma State University

Stillwater OK 74078



(405) 744-6358



[email protected]




_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to