Good evening Tim, If you have your 24hour miniseed data in a BUD or SDS archive you can use wavetool -arc -start "time" -duration "time" -wav_out_file SEISAN To extract the time windows of you events. Note that the archive and the data channels must be defined in your SEISAN.DEF http://seis.geus.net/software/seisan/node18.html Then dirf *newfiles* And autoreg to move new files into your database, and eev to process.
Or if you have the events in your seisan database and the BUD/SDS data channels in SEISAN.DEF, you can type 'arc' in eev before you plot. But it can be a slow process with a lot of 100sps data. Gaps in Guralp data is something I hear a lot. It sometimes help to upgrade the firmware... If your 24hour miniseed data are not sorted in time it could cause problems, use msi -T miniseed.file to check. https://seiscode.iris.washington.edu/projects/msi To fix use dataselect -Pr miniseec.file -o fixed.file https://seiscode.iris.washington.edu/projects/dataselect/wiki dataselect can also push miniseed data to a BUD archive. Your event looks nice, did you not pick amplitudes? And is your earth model the same as the one OGS use? Good luck, Peter Fra: [email protected] [mailto:[email protected]] På vegne af Sickbert, Tim Sendt: 9. oktober 2015 13:48 Til: [email protected] Emne: [seisan] Problems with continuous databases Good morning. OK. I am having many, many issues working with SEISAN. In spite of all the issues, I am very pleased with what SEISAN enables me to do when it behaves well, so I don't want to give up on it. I would very much like to figure out how to make it work well for me. Background: This is not my day job. I have financial support for equipment and operational expenses, plus occasional advice, but otherwise I am working solo. I started deploying ten Guralp CMG-6TDs just over a year ago. No telemetry, I have been periodically downloading data from the onboard digitizer/logger (essentially a Guralp CD24) as 24-hour both GCF and miniseed files. I am also using data available from IRIS DMC for nearby stations on networks OK, GS, and ZD. I was initially processing with Seismic Handler (SHM), but have been unable to reliably extract amplitudes or magnitudes, so I am transitioning to SEISAN. Having 24-hour continuous digital waveform files in miniseed format, I spent a few weeks trying to modify and recompile SEISAN to be able to handle 24-hour files. I was unable to make that work. Then I found "mscut" that allowed me to split the 24-hour miniseed files into 1-hour files. Good. I have been able to "dirf" the 1-hour miniseed files into "filenr.lis" and "autoreg" the list of miniseed files into <seismo>/REA/<database>/<year>/<month>/<dd>-<hhmm>-<ss>L.S<yyyymm> parameter files and, running "mulplt" in the local directory containing the continuous waveform files, process them with some limited success. More on the limits below. Having hit significant limits processing miniseed files, I searched further and found "seisei" that merged the miniseed files into SEISAN (<yyyy>-<mm>-<dd>-<hhmm>-<ss>S.<database>_###) files, the structure of which I do not yet understand. Let me know if it matters very much. So I would run "seisei", then "dirf <yyyy>-mm>-<dd>" to create "filenr.lis", and "autoreg" the files into the REA database, and then "mulplt" to pick phase onsets and amplitudes. It sometimes works, but with limitations similar to but not exactly the same as running "mulplt" against a database of miniseed files. In the following, I THINK that what I write is generally but not specifically true for processing both a database of miniseed files and a database of SEISAN files, unless otherwise noted. "Generally" in that when processing either database, "mulplt" will plot more than the requested length of time (55 or 60 minutes); "not specifically" in that with a database of miniseed files "mulplt" may display three hours of data, while with a database of SEISAN files "mulplt" may display five hours of data. It may be worthwhile to note here that the continuous waveform files downloaded from the Guralp instruments are not always continuous over a period of an hour. Typically, one or two of the miniseed files has a discontinuity. Even so, the gap is short and the data is nearly complete. With this text I am also sending screen captures from PQL II that illustrate the breaks in the data. Observations: - I run "mulplt", "cont", <yyyymmddhh>, "55" [or "60"], "1" "o", <enter>, "o", "t" {where values in quotes are literal entries; values in angle-braces are variables, e.g., I might enter "20150106" for <yyyymmdd>}, but meta-keys are also in angle-braces, i.e., <enter> or <return> indicate pressing a key. tim@xenoK:/media/tim/OS/scream/xfer_20150117_msd/20150106$ mulplt Filename, number, filenr.lis (all) Continuous SEISAN data base: cont Large SEED volume: conts Archive: arc Make a choice cont Give start time, yyyymmddhhmmss 2015010600 Interval in min 60 2015 1 Reading events from base OKSTU 1407 Plot options: Interactive picking Return Multi trace plot on screen, def (0) Multi trace plot on screen (1) Multi trace plot on screen+laser(2) Multi trace plot on laser (3) Continuoues on screen (4) Continuoues on screen + laser (5) Continuoues on laser (6) Stop (q) The resulting "mulplt" screen is captured in "mulplt_2015010600_60min_but_3hr.png". I tried a 55-minute interval and "mulplt" displayed four hours of data for the HHZ component of station QUOK, i.e., similar results. I tried a 15-minute interval and mulplt displayed 15 minutes of data for all the A* stations, CROK, and OK031; 1 hour for KNG1 and two components of QUOK; and 2 hours for QUOK HHZ. In the attached screen capture, also note the data dropout on KNG1 and QUOK at the beginning of hour 2: this is a ubiquitous problem. The attached screen capture "mulplt_2015010600_60min_zoom_missing_first.png" illustrates that "mulplt" has some kind of issue with displaying the beginning of the data. In contrast, the screen capture "PQL_II_2015010600_60min.png" demonstrates that all the data is available in the *_HH? miniseed continuous waveform files. I approximately located the largest event in the period: date hrmn sec lat long depth no m rms damp erln erlt erdp 15 1 6 021 51.96 3624.72N 97 19.5W 6.5 17 3 0.13 0.000 1.1 1.6 1.9 stn dist azm ain w phas calcphs hrmn tsec t-obs t-cal res wt di A005 20 168.3105.9 0 P PG 021 56.1 4.17 3.98 0.19 1.00 3 A005 20 168.3105.9 0 S SG 021 58.8 6.84 6.93 -0.09 1.00 12 A008 24 125.7103.1 0 P PG 021 56.7 4.78 4.72 0.06 1.00 4 A008 24 125.7103.1 0 S SG 022 0.2 8.25 8.22 0.03 1.00 5 A006 32 159.4100.0 0 P PG 021 57.9 5.99 6.01 -0.02 1.00 1 A006 32 159.4100.0 0 S SG 022 2.4 10.42 10.45 -0.03 1.00 8 A002 37 114.5 98.7 0 P PG 021 58.8 6.79 6.77 0.02 1.00 6 A002 37 114.5 98.7 0 S SG 022 3.4 11.48 11.79 -0.31 1.00 7 A001 39 153.8 67.7 0 P PN5 021 59.1 7.10 7.10 0.00 1.00 2 KNG1 46 227.1 67.7 0 P PN5 022 0.2 8.20 8.21 -0.01 1.00 5 A003 54 129.4 67.7 0 P PN5 022 1.6 9.67 9.53 0.14 1.00 2 A003 54 129.4 67.7 0 S SN5 022 8.3 16.37 16.59 -0.22 1.00 13 A009 56 148.7 67.7 0 P PN5 022 1.9 9.92 9.84 0.08 1.00 2 CROK 60 280.1 67.7 0 P PN5 022 2.5 10.52 10.54 -0.02 1.00 9 CROK 60 280.1 67.7 0 S SN5 022 10.1 18.18 18.35 -0.17 1.00 14 QUOK 62 115.5 67.7 0 P PN5 022 2.8 10.88 10.77 0.11 1.00 4 OK031 67 139.2 67.7 0 P PN5 022 3.8 11.88 11.65 0.23 1.00 2 2015 1 6 0021 52.0 L 36.412 -97.325 6.5 OSU 11 0.1 OLD: 1 6 0 0 0.0 L Return to continue The Oklahoma Geological Survey catalog location is: 15805 2015/01/06 00:21:52.06 36.41689 -97.32362 4.923 1 0.6 2.2 0.51 NOBLE OGS 2.6 ML OGS The OGS catalog and approximate "mulplt" event times and locations are sufficiently close to each other to demonstrate that "mulplt" in this case--where "mulplt" does not properly display the data at the beginning of the period--the data is still properly placed in time. Because I had trouble with miniseed continuous databases, I tried migrating the data to a SEISAN continuous database using "seisei" to merge the files into <yyyy>-<mm>-<dd>-<ss>S.<database>_### files, "dirf" the files into "filenr.lis" and "autoreg" the files into REA, then "mulplt" "cont" for analysis. The results are similar, as illustrated by, for example, "mulplt_2015010602_55min_got_7hr_SEISEI_database.png". Further issues: - Even when "mulplt" properly shows the period I selected from the continuous database, when I register an event and then subsequently process it with "eev" "po" (to get back to "mulplt"), I sometimes get the appropriate period from the original "mulplt" zoomed window; other times I get the entire period from the original "mulplt". That is, registering an event in "mulplt" ("p") sometimes saves the ~3-minute waveform files that I expect, and other times saves the entire 1-hour file. - I ran "mulplt": tim@xenoK:/media/tim/OS/scream/xfer_20150117_msd/20150106$ mulplt Filename, number, filenr.lis (all) Continuous SEISAN data base: cont Large SEED volume: conts Archive: arc Make a choice cont Give start time, yyyymmddhhmmss 2015010605 Interval in min 55 2015 1 Reading events from base OKSTU 1424 Plot options: Interactive picking Return Multi trace plot on screen, def (0) Multi trace plot on screen (1) Multi trace plot on screen+laser(2) Multi trace plot on laser (3) Continuoues on screen (4) Continuoues on screen + laser (5) Continuoues on laser (6) Stop (q) and ended up with the display shown by "mulplt_2015010605_misalignment" and "mulplt_2015010605_misalignment_zoomed". Ignore all the missing data for the moment: the data are displaced in time. Note especially "A001 HHE" where the onset of the signal at about "5h06" preceeds the onset of the signal on "A001 HHZ". I encounter this sort of misalignment rather regularly. Occasionally, I can get around it by selecting a different start time and interval for "mulplt", and executing "f" to move forward in time, but this does not reliably align the data in time. It may be helpful to you to have the continuous waveform data files that I am using, but they are too large to try to send via e-mail. I would be happy to make them available by sharing over cloud storage. ------------------------ Start time 201501060200 Interval 55 Displays about 4 hours with several data dropouts < screen print > PQL II shows pql 2015-01-06-02*_?H? Tim Sickbert Devon Lab Coordinator Boone Pickens School of Geology 105 Noble Research Center Oklahoma State University Stillwater OK 74078 (405) 744-6358 [email protected]<mailto:[email protected]>
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
