Abhash: It doesn’t seem that you are in the single trace mode because in the upper menu you don’t get to see the Azimuth (h) option. Try typing “t” until you switch to single trace mode and the Azim (t) (h) option appears on the top menu. Sorry for the mistake, it is (h) and not (t)
Regards, Antonio Antonio A. Abrego M. Ingeniero Civil Unidad de Ingeniería Geotécnica División de Ingeniería Tel. 276-1989 E-Mail: [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Abhash Kumar Sent: Wednesday, January 20, 2016 2:19 PM To: Edgar G. Paz Martínez Cc: [email protected] Subject: Re: [seisan] seisan Digest, Vol 95, Issue 8 Hi Edgar, I selected single trace (Z-component) after launching eev and then picked both P and S-phase on the Z-component (as attached). I then pressed "h", but I did not get azimuth at the bottom line (as you can see in the attached screen shot). I would be grateful if someone can send me the suggestion in little detail. Best regards Abhash kumar On Wed, Jan 20, 2016 at 2:06 PM, Edgar G. Paz Martínez <[email protected]<mailto:[email protected]>> wrote: Abhash: You must be on eev's single trace mode before you press h. Le 20 janv. 2016 12:58, <[email protected]<mailto:[email protected]>> a écrit : Today's Topics: 1. Event location from 3-component single station (Abhash Kumar) ---------------------------------------------------------------------- Message: 1 Date: Wed, 20 Jan 2016 13:49:43 -0500 From: Abhash Kumar <[email protected]<mailto:[email protected]>> Subject: [seisan] Event location from 3-component single station To: [email protected]<mailto:[email protected]>, Lars Ottemoller <[email protected]<mailto:[email protected]>>, Jens Havskov <[email protected]<mailto:[email protected]>> Hi, I am trying to locate events using data from a single 3-component station in Seisan 10.3. I picked two phase arrivals and need to find out azimuth to get the location. I thoroughly read the manual and it says: "If a 3 component station is available, the azimuth of arrival can be determined using the method developed by Roberts et al. [1989]. Display any of the 3 components and press h (Azim). Then select a zoom window around the P-arrival of a few secs duration for the analysis. The 3 components will now be displayed below in order Z, N and E and the calculated azimuth, apparent velocity and correlation will be displayed at the bottom line." I am using eev to display all the three components with P and S phase picked on the Z and E-component (as attached). I pressed "h" and then zoom around the P-pick, but I don't see any azimuth values at the bottom line. The eev screen is full of three components and there is no space at the bottom line to display anything. I looked at the example figure in the manual (as attached) and thought that I may have to pick both P and S on the Z-component for time being and then press "h" to get the azimuth, but even that does not seem to work. I would be extremely grateful for any suggestions. Best regards Abhash kumar -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/html Size: 1410 bytes Desc: not available URL: <http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment.txt> -------------- next part -------------- A non-text attachment was scrubbed... Name: Phasepick.PNG Type: image/png Size: 182747 bytes Desc: not available URL: <http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment.png> -------------- next part -------------- A non-text attachment was scrubbed... Name: Manual figure.PNG Type: image/png Size: 60029 bytes Desc: not available URL: <http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment-0001.png> ---------------------------------------------------------------------- Send seisan mailing list submissions to [email protected]<mailto:[email protected]> To subscribe or unsubscribe via the World Wide Web, visit http://mailman.uib.no/listinfo/seisan or, via email, send a message with subject or body 'help' to [email protected]<mailto:[email protected]> You can reach the person managing the list at [email protected]<mailto:[email protected]> When replying, please edit your Subject line so it is more specific than "Re: Contents of seisan digest..." _______________________________________________ seisan mailing list [email protected]<mailto:[email protected]> http://mailman.uib.no/listinfo/seisan End of seisan Digest, Vol 95, Issue 8 ************************************* _______________________________________________ seisan mailing list [email protected]<mailto:[email protected]> http://mailman.uib.no/listinfo/seisan
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
