All clear but how to rewrite a sfile quickly easily and precisely?
I see the synthetic arrival times in print.out but print.out is not in nordic format.
Is there a better way than manually copying numbers from file to file?

E.g. after locating in mutplt the synthetic phases are visible as blue picks, is it possible to write the blue phases to sfile (replace red picks with the blue)?

Grazyna


----- Original Message ----- From: "Christian BAILLARD" <[email protected]> To: "Grazyna Holeczek" <[email protected]>; "Voss, Peter" <[email protected]>; <[email protected]>
Sent: Friday, April 15, 2016 11:42 PM
Subject: Re: [seisan] Synthetic Sfile


Hi Grazyna,

I think that the method detailed by Peter is the best way to do it.
Fix the location and origin time, set random arrival times slightly
after origin time, run hypo, read print.out, rewrite an sfile.

Regards,

Christian

On 15/04/2016 23:01, Grazyna Holeczek wrote:
Dear all
I am also interested in this issue.
I wonder how to replace the random arrival times in s-file with the theoretical ones. Is there any automatic way (with a commad) or manually by editing s-file only?

Best regards
Grazyna Holeczek


----- Original Message ----- From: "Voss, Peter" <[email protected]>
To: "'baillard'" <[email protected]>; <[email protected]>
Sent: Friday, April 15, 2016 10:17 AM
Subject: Re: [seisan] Synthetic Sfile


Hi Christian,

This would be my way, but you need to do some fortran programming then.
I would use
PRO/sample_read_write_s.for
As a starting point

You can fix X,Y,Z and T0 by adding the 3 "F" seen here (see appendix A, type 1): 1985 510F21 5 16.1 LE 60.240 6.170 30.0FFBER 6 2.3 3.8LNAO 4.0bPDE 3.2sISC 1

I would then add all my stations to the sfile with random P and S arrival times x and y sec after hypo-time.
and locate with
hyp sfilename
the theoretical arrival time are the seen in the file 'print.out'
and these can used to replace the random arrival times.

Good luck,
Peter

-----Oprindelig meddelelse-----
Fra: [email protected] [mailto:[email protected]] På vegne af baillard
Sendt: 15. april 2016 09:41
Til: [email protected]
Emne: [seisan] Synthetic Sfile

Dear seisan users,

I was wondering what was the best way to generate a synthetic sfiles with all theoreticals arrival time associated to stations referenced in my STATION0.HYP (With hypocenter's X,Y,Z, T0 fixed) Do you have any idea?

Best regards and thanks for your help,

Christian



_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan



_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to