On Fri, Oct 19, 2018 at 4:26 PM Stephen Smalley <[email protected]> wrote:
> On 10/18/2018 03:47 AM, Ondrej Mosnacek wrote:
> > Do the LE conversions before doing the Infiniband-related range checks.
> > The incorrect checks are otherwise causing a failure to load any policy
> > with an ibendportcon rule on BE systems. This can be reproduced by
> > running (on e.g. ppc64):
> >
> > cat >my_module.cil <<EOF
> > (type test_ibendport_t)
> > (roletype object_r test_ibendport_t)
> > (ibendportcon mlx4_0 1 (system_u object_r test_ibendport_t ((s0) (s0))))
> > EOF
> > semodule -i my_module.cil
> >
> > Also, fix loading/storing the 64-bit subnet prefix for OCON_IBPKEY to
> > use a correctly aligned buffer.
> >
> > Finally, do not use the 'nodebuf' (u32) buffer where 'buf' (__le32)
> > should be used instead.
> >
> > Tested internally on a ppc64 machine with a RHEL 7 kernel with this
> > patch applied.
> >
> > Cc: Daniel Jurgens <[email protected]>
> > Cc: Eli Cohen <[email protected]>
> > Cc: James Morris <[email protected]>
> > Cc: Doug Ledford <[email protected]>
> > Cc: <[email protected]> # 4.13+
> > Fixes: a806f7a1616f ("selinux: Create policydb version for Infiniband
> > support")
> > Signed-off-by: Ondrej Mosnacek <[email protected]>
> > ---
> > security/selinux/ss/policydb.c | 46 +++++++++++++++++++++++-----------
> > 1 file changed, 32 insertions(+), 14 deletions(-)
> >
> > Changes in v4:
> > - defer assignment to 16-bit struct fields to after the range check
> >
> > Changes in v3:
> > - use separate buffer for the 64-bit subnet_prefix
> > - add comments on the byte ordering of subnet_prefix
> > - deduplicate the le32_to_cpu() calls from checks
> >
> > Changes in v2:
> > - add reproducer to commit message
> > - update e-mail address of James Morris
> > - better Cc also the old SELinux ML
> >
> > diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
> > index f4eadd3f7350..d50668006a52 100644
> > --- a/security/selinux/ss/policydb.c
> > +++ b/security/selinux/ss/policydb.c
> > @@ -2108,6 +2108,7 @@ static int ocontext_read(struct policydb *p, struct
> > policydb_compat_info *info,
> > {
> > int i, j, rc;
> > u32 nel, len;
> > + __be64 prefixbuf[1];
> > __le32 buf[3];
> > struct ocontext *l, *c;
> > u32 nodebuf[8];
> > @@ -2217,21 +2218,30 @@ static int ocontext_read(struct policydb *p, struct
> > policydb_compat_info *info,
> > goto out;
> > break;
> > }
> > - case OCON_IBPKEY:
> > - rc = next_entry(nodebuf, fp, sizeof(u32) * 4);
> > + case OCON_IBPKEY: {
> > + u32 pkey_lo, pkey_hi;
> > +
> > + rc = next_entry(prefixbuf, fp, sizeof(u64));
> > + if (rc)
> > + goto out;
> > +
> > + /* we need to have subnet_prefix in CPU order
> > */
> > + c->u.ibpkey.subnet_prefix =
> > be64_to_cpu(prefixbuf[0]);
> > +
> > + rc = next_entry(buf, fp, sizeof(u32) * 2);
> > if (rc)
> > goto out;
> >
> > - c->u.ibpkey.subnet_prefix =
> > be64_to_cpu(*((__be64 *)nodebuf));
> > + pkey_lo = le32_to_cpu(buf[0]);
> > + pkey_hi = le32_to_cpu(buf[1]);
> >
> > - if (nodebuf[2] > 0xffff ||
> > - nodebuf[3] > 0xffff) {
> > + if (pkey_lo > U16_MAX || pkey_hi > U16_MAX) {
> > rc = -EINVAL;
> > goto out;
> > }
> >
> > - c->u.ibpkey.low_pkey =
> > le32_to_cpu(nodebuf[2]);
> > - c->u.ibpkey.high_pkey =
> > le32_to_cpu(nodebuf[3]);
> > + c->u.ibpkey.low_pkey = pkey_lo;
> > + c->u.ibpkey.high_pkey = pkey_hi;
> >
> > rc = context_read_and_validate(&c->context[0],
> > p,
> > @@ -2239,6 +2249,7 @@ static int ocontext_read(struct policydb *p, struct
> > policydb_compat_info *info,
> > if (rc)
> > goto out;
> > break;
> > + }
> > case OCON_IBENDPORT:
> > rc = next_entry(buf, fp, sizeof(u32) * 2);
> > if (rc)
> > @@ -2249,13 +2260,14 @@ static int ocontext_read(struct policydb *p, struct
> > policydb_compat_info *info,
> > if (rc)
> > goto out;
> >
> > - if (buf[1] > 0xff || buf[1] == 0) {
> > + c->u.ibendport.port = le32_to_cpu(buf[1]);
>
> ibendport.port is a u8 here, same issue.
Yup, that'll be another re-spin...
>
> > +
> > + if (c->u.ibendport.port > 0xff ||
> > + c->u.ibendport.port == 0) {
> > rc = -EINVAL;
> > goto out;
> > }
> >
> > - c->u.ibendport.port = le32_to_cpu(buf[1]);
> > -
> > rc = context_read_and_validate(&c->context[0],
> > p,
> > fp);
> > @@ -3105,6 +3117,7 @@ static int ocontext_write(struct policydb *p, struct
> > policydb_compat_info *info,
> > {
> > unsigned int i, j, rc;
> > size_t nel, len;
> > + __be64 prefixbuf[1];
> > __le32 buf[3];
> > u32 nodebuf[8];
> > struct ocontext *c;
> > @@ -3192,12 +3205,17 @@ static int ocontext_write(struct policydb *p,
> > struct policydb_compat_info *info,
> > return rc;
> > break;
> > case OCON_IBPKEY:
> > - *((__be64 *)nodebuf) =
> > cpu_to_be64(c->u.ibpkey.subnet_prefix);
> > + /* subnet_prefix is in CPU order */
> > + prefixbuf[0] =
> > cpu_to_be64(c->u.ibpkey.subnet_prefix);
> >
> > - nodebuf[2] =
> > cpu_to_le32(c->u.ibpkey.low_pkey);
> > - nodebuf[3] =
> > cpu_to_le32(c->u.ibpkey.high_pkey);
> > + rc = put_entry(prefixbuf, sizeof(u64), 1, fp);
> > + if (rc)
> > + return rc;
> >
> > - rc = put_entry(nodebuf, sizeof(u32), 4, fp);
> > + buf[0] = cpu_to_le32(c->u.ibpkey.low_pkey);
> > + buf[1] = cpu_to_le32(c->u.ibpkey.high_pkey);
> > +
> > + rc = put_entry(buf, sizeof(u32), 2, fp);
> > if (rc)
> > return rc;
> > rc = context_write(p, &c->context[0], fp);
> >
>
Thanks,
--
Ondrej Mosnacek <omosnace at redhat dot com>
Associate Software Engineer, Security Technologies
Red Hat, Inc.
_______________________________________________
Selinux mailing list
[email protected]
To unsubscribe, send email to [email protected].
To get help, send an email containing "help" to [email protected].
