In a message dated 08/16/00 11:28:41 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
> Polish or wax/cleaner I believe.
Yeah, but remember, polish and wax are totally different. polish is to get
that glossy look, wax is to protect it. Just polishing it is not good
enough, you need the wax to protect it. And be careful buffing, it can
easily go through the finish if your not careful. My advise: Sand it down
smooth with like 2000 paper, then Use a small(like 3 inch) foam pad on the
buffer with some good rubbing compound, then polish it out with some good
polish, then wax it all up real good. but read and be carefull first.
Mike Clark
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at <http://www.sentra.net/sml/>.
