In a message dated 11/22/00 12:01:42 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
> There are differences in the Hotshot CAI for the GA16 compared to other
> brands. It has a stepped diameter. This was found by accident, it did
not
> calculate out. We were just fooling around on the dyno and found that it
> helped the CAI gain a few HP over a standard setup.
>
> The math said 2.5" tubing should work so we tested 2.5" and 3". Then we
> tried different combinations of 2.5" and 3" sections just for kicks and
> discovered the stepped pipe where it is 3" before the MAF and 2.5" after
> gives the most power and the broadest range.
>
> Sometimes dyno testing can tell you more than just figuring it out on
paper.
>
> BTW, We will be testing the prototype JWT cams next week.
>
> Mike
Mike, you da man! We(or at least I do) appreciatte all the help on our
1.6's. I'm one of those people that aren't to worried about
performance(yet), but I feel I will be one of the ones that actually follow
through on this group deal. Many others won't, and then they will be the
ones complaining and saying they wish they had.
Later on, let us know when and where the info goes and comes from!
Mike Clark
