This is probably far from ideal, but it works for me and I'm putting it out
there in case you're messing with XS 0.5 and need to have eth1 working now
so you can test other stuff. I'm sure there's a more elegant solution.
Put this in /etc/rc.local
ifenslave lanbond0 eth1
Reboot. And there we go:
[EMAIL PROTECTED] ~]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:0D:56:05:7C:DA
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:4348 errors:0 dropped:0 overruns:0 frame:0
TX packets:5381 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:368480 (359.8 KiB) TX bytes:6433735 (6.1 MiB)
I've connected a few XOs to my test platform so far and haven't seen any
unexpected issues. I don't know if you have to edit
/etc/modprobe.d/xs_bonding with Jerry's suggestion below, but I've got that
in there.
options lanbond0 mode=active-backup miimon=100
options mshbond0 mode=active-backup miimon=100
options mshbond1 mode=active-backup miimon=100
options mshbond2 mode=active-backup miimon=100
Of course, you can just run ifenslave lanbond0 eth1, but it doesn't persist
on reboot.
Anna Schoolfield
Birmingham
_______________________________________________
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
