Just registered for developer key for the XO. See if I could run XS-setup again 
with the XO unlock. Pity I have no way of flashing to the latest 12.1.0 build 
21.

Without ejabberd running or http runnig at least I am able to support 10 XO via 
a external AP and a wired WAN from another USBEthernet. The power source for 
the external AP is powered by the XO USB and hence no external power supply is 
needed for it to server as a school server. That is cool.

Will update on progress but I will be back to the XS7 for a coming deployment.

Cheers

>-----Original Message-----
>From: Tim Moody [mailto:timmo...@sympatico.ca]
>Sent: Sunday, March 3, 2013 09:34 AM
>To: tkk...@nurturingasia.com
>Cc: server-devel@lists.laptop.org
>Subject: Re: [Server-devel] XS Community Edition: XO 1.75 installtion
>
>Initially, at least, the expected configuration is that the internal wifi is 
>used for external access (wan) and the ap is attached to a usb ethernet 
>device for interanl access (lan).
>
>-----Original Message----- 
>From: tkk...@nurturingasia.com
>Sent: Saturday, March 02, 2013 8:23 PM
>To: Jerry Vonau
>Cc: server-devel@lists.laptop.org
>Subject: Re: [Server-devel] XS Community Edition: XO 1.75 installtion
>
>Great getting support for the list.
>
>No it is a brand new XO 1.75 which have not been unlocked. Is that a must?
>
>What is the typical setup ? As the XO internal Wifi can be turned into a 
>WiFi I will need a external AP connected to my USBEthernet plug. To get 
>internet access I will then need another USBEthernet plugin with connection 
>for wired internet access. It will so nice that the XO internal wifi can act 
>as a AP making less need for external AP!
>
>Looking forward to future addition. The ability for the XO to server as a 
>webs erver while providing connection for other XOs is really a great 
>start - esp for small deployments!
>
>Great weekend to all.
>
>>-----Original Message-----
>>From: Jerry Vonau [mailto:jvo...@shaw.ca]
>>Sent: Sunday, March 3, 2013 05:08 AM
>>To: tkk...@nurturingasia.com
>>Cc: 'Anna', server-devel@lists.laptop.org
>>Subject: Re: [Server-devel] XS Community Edition: XO 1.75 installtion
>>
>>On Sat, 2013-03-02 at 17:31 +0000, tkk...@nurturingasia.com wrote:
>>> Yes it is a 12.1.0 (build 10) as I cannot flash the new build 21 since 
>>> the image I have is "customised".
>>>
>>
>>Is your 1.75 locked?
>>
>>> For the 1st installation I did not have the USB-Ethernet-AP connection 
>>> plugin.
>>>
>>
>>Your best bet is to have all your interfaces plugging in before booting
>>the XO, otherwise when we detect the number of interfaces we will miss
>>installing some components that is vital to using the XS as a router. We
>>prompt if we detect less than what is required for a router, but I
>>prefer to have the interfaces appear in the same order as what the
>>kernel will find if just rebooted. This is more of an issue when your
>>using 2 usb based interfaces and not using the XO's internal wifi.
>>
>>> Maybe I should use another XO to start all over again!
>>>
>>
>>I would prefer if you could use 12.1.0-21 as a starting point as that is
>>what we are testing with. If you can't do that, please ensure your
>>network adaptor is inserted before booting then run the install.
>>
>>
>>> Thanks for the detail step by step. Hope I have better luck the next 
>>> time.
>>>
>>
>>see:
>>
>>http://wiki.laptop.org/go/User:Holt/XS_Community_Edition/0.2/Hacking
>>Installing.
>>
>>
>>> Does Moodle, registration, etc work as usual with a complete install?
>>>
>>>
>>
>>Moodle is left uninstalled, but can be added later if wanted/needed,
>>instructions to follow.
>>
>>Thanks for the valuable feedback,
>>
>>Jerry
>>
>>
>>> Cheers
>>> >-----Original Message-----
>>> >From: Anna [mailto:ascho...@gmail.com]
>>> >Sent: Sunday, March 3, 2013 12:42 AM
>>> >To: tkk...@nurturingasia.com
>>> >Cc: server-devel@lists.laptop.org
>>> >Subject: Re: [Server-devel] XS Community Edition: XO 1.75 installtion
>>> >
>>> >Just to clarify, you're on a 1.75 running 12.1.0?  And before you 
>>> >started
>>> >doing anything in the instructions, did you plug in a USB wifi dongle
>>> >connected to a powered up AP?
>>> >
>>> >My usual process for getting ready to install is:
>>> >
>>> >1.  Flash 12.1.0 on a 1.75
>>> >2.  It reboots itself, I set the buddy name
>>> >3.  In NH, I connect to my home wifi
>>> >4.  Turn off power management in the Sugar Control Panel
>>> >5.  Plug in the ethernet cable that connects the usb wifi dongle to the 
>>> >AP
>>> >6.  Plug the AP's power into the wall outlet
>>> >7.  Insert the usb wifi dongle into the 1.75
>>> >8.  Open the terminal activity and start following the install 
>>> >instructions
>>> >
>>> >On Sat, Mar 2, 2013 at 10:23 AM, <tkk...@nurturingasia.com> wrote:
>>> >
>>> >>
>>> >> Must I use an external AP or there is more magic if the XO wirless can
>>> >> function as this ?
>>> >>
>>> >>
>>> >As far as I know, the XO's wifi chip doesn't support AP mode, so
>>> >unfortunately no.
>>> >
>>> >Anna Schoolfield
>>> >Birmingham
>>> >
>>>
>>>
>>> _______________________________________________
>>> Server-devel mailing list
>>> Server-devel@lists.laptop.org
>>> http://lists.laptop.org/listinfo/server-devel
>>
>>
>>
>
>
>_______________________________________________
>Server-devel mailing list
>Server-devel@lists.laptop.org
>http://lists.laptop.org/listinfo/server-devel 
>
>


_______________________________________________
Server-devel mailing list
Server-devel@lists.laptop.org
http://lists.laptop.org/listinfo/server-devel

Reply via email to