Hello
Trying to configure my own James mail server and have problems with:
Everytime receive the same messages from the global service like mail.ru. Just
it like a loop everytime keep going to get to my local James server mail
letters which I have on my mail.ru account. Like iteration with mail request.
Here is my fetchmail config from my Apache James:
[CODE]<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<!-- Fetch mail block, fetches mail from message servers and inserts it into
the incoming spool -->
<!-- Warning: It is important to prevent mail from looping by setting the
-->
<!-- fetched domains in the <servernames> section of the <James> block
-->
<!-- above. This block is disabled by default.
-->
<!-- See http://james.apache.org/server/2.3.0/fetchmail_configuration.html for
detailed -->
<!-- configuration instructions and examples.
-->
<!-- I M P O R T A N T -->
<!-- Setting markseen="true" will have no effect on many POP3 servers as the
POP3 -->
<!-- protocol does not require the markSeen flag to be supported. When this is
the -->
<!-- case, the only way to ensure that messages are fetched just once is to
delete -->
<!-- fetched messages from the server with leaveonserver="false". -->
<!-- If you want to perform mailet processing on messages fetched by
fetchmail, -->
<!-- use the HasMailAttribute matcher to detect messages with the
MailAttribute -->
<!-- org.apache.james.fetchmail.taskName. The attribute's value is that of the
-->
<!-- fetch task's name parameter described below. -->
<fetchmail enabled="true">
<!-- You can have as many fetch tasks as you want, but each must have a
-->
<!-- unique name by which it is identified. -->
<!-- Each task runs at the specified <interval>, tasks may run
concurrently. -->
<fetch name="demidovdomain.com">
<!-- There must be one <accounts> entry per fetch task. An accounts
entry can have 0 to many -->
<!-- <account> entries and 0 or 1 <alllocal> entries. <alllocal>
generates -->
<!-- <accounts> for every user defined to James. <accounts> run
consecutively within the -->
<!-- scope of their fetch task and inherit all the properties of the
fetch task. -->
<!-- The advantage of running consecutively is that we can avoid
conflicting fetch tasks -->
<!-- operating concurrently on the same mailboxes. -->
<!-- Fetchmail attempts to deduce the correct recipient of each
message, but sometimes there is -->
<!-- insufficient information in the headers to do so. When the
correct recipient cannot be deduced, -->
<!-- fetchmail can be configured to leave the mail on the server or
deliver it to a default recipient. -->
<!-- When a message server delivers mail for a single user to a
specific INBOX you can define -->
<!-- each user to James (via the console) and use <alllocal> with
ignorercpt-header="true" to deliver mail -->
<!-- directly from each users INBOX onto James' spool. There is no
need to update 'config.xml' -->
<!-- each time you add or remove users, fetchmail checks the list of
users at the start of each fetch. -->
<!-- When a message server provides an account that gives access to
all mail for a domain through a single -->
<!-- INBOX, you can use an <account> to fetch all the mail for that
domain, using the filter facilities -->
<!-- described below to reject unwanted messages. -->
<!-- When a message server supports BOTH delivery for a single user
to a specific INBOX and access to all mail -->
<!-- for a domain through a single INBOX, you can use <alllocal> and
<account> together to guarantee that all -->
<!-- local mail gets delivered to the correct user and all unwanted
mail is deleted from the message -->
<!-- server. See
http://james.apache.org/server/2.3.0/fetchmail_configuration.html for details. -->
<!-- Limitations and Future Directions -->
<!-- 1) <alllocal> requires the password for all accounts for a
domain on the message server be the same. True -->
<!-- in many cases, but not all. A future version might work out a
way of associating James users with a set -->
<!-- of account properties. -->
<!-- 2) <alllocal> will try to access an INBOX on the message server
for all local users. The instance of James used -->
<!-- for this purpose should not have extraneous users defined. This
is inefficient, but not fatal. -->
<!-- Again, a future version might work out a way of associating
James users with message account properties. -->
<!-- This would allow all local users with an account on a particular
message server to be fetched. -->
<accounts>
[B] <!--<alllocal userprefix="" usersuffix="@myaccount" password="password"
recipientprefix="" recipientsuffix="@mydomain.com" ignorercpt-header="true"/>-->[/B]
[B] <account user="[email protected]" password="pass"
recipient="demidov@demidov" ignorercpt-header="true"/>[/B]
<!-- Custom recipient header handling -->
<!-- this example search an header named X-Envelope-To and use
the recipient found in that header -->
<!--
[B]<account customrcpt-header="X-Envelope-To" user="myglobalaccount"
password="password" recipient="postmaster@localhost" ignorercpt-header="false"/>[/B]
-->
</accounts>
<!-- The address of the server from which to fetch the mail -->
[B]<host>pop.mail.ru</host>[/B]
<!-- How frequently this host is checked - in milliseconds. 600000 is
every ten minutes -->
[B]<interval>60000</interval>[/B]
<!-- name of the javamail provider you wish to use -->
<!-- (pop3, imap, etc. -->
<javaMailProviderName>pop3</javaMailProviderName>
<!-- name of the folder to open -->
<javaMailFolderName>INBOX</javaMailFolderName>
<!-- Properties to be applied to the JavaMail Session. -->
<!-- Properties are specific to the selected JavaMail provider. -->
<!-- Any number may be specified. -->
<javaMailProperties>
<!-- Set the connection timeout to 3 minutes -->
[B] <property name="mail.pop3.connectiontimeout"
value="180000"/>[/B]
<!-- Set the I/O timeout to 3 minutes -->
[B] <property name="mail.pop3.timeout" value="180000"/> [/B]
</javaMailProperties>
<!-- Retrieve both old (seen) and new messages from mailserver. The
default -->
<!-- is to fetch only messages the server has not marked as seen
-->
[B]<fetchall>false</fetchall>[/B]
<!-- If the folder javaMailFolderName contains subfolders do you
-->
<!-- want to recurse into the subfolders as well? true = yes, false =
no -->
[B] <recursesubfolders>true</recursesubfolders>[/B]
<!-- If the From: header of a fetched message has a valid user part
-->
<!-- but no domain part the fetch task will correct this by appending
-->
<!-- a default domain. eg: 'james' becomes 'james@defaultdomain'
-->
<!-- The default behaviour is to append the canonical host name of
the James server. -->
<!-- You can override this behaviour here by specifying the name of
the domain -->
<!-- you wish to append. The name you choose must be a local server
or you can -->
<!-- use the name localhost -->
<!-- Example using a locally served domain -->
<!--
[B]<defaultdomain>mydomain.com</defaultdomain>[/B]
-->
<!-- Example using localhost -->
[B]<defaultdomain>demidov</defaultdomain> [/B]
<!-- Specify what happens to messages succesfully fetched from the
mailserver -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as seen
-->
<!-- if false, messages left on the server will not be marked as
seen -->
[B] <fetched leaveonserver="true" markseen="true"/>[/B]
<!-- Specify the index of the RECEIVED Header used to compute the
remote address and remote host name -->
<!-- and what happens to messages that contain an invalid header at
that index. -->
<!-- Matchers such as InSpammerBlacklist use the remote address
and/or remote host name to identify illegitimate -->
<!-- remote MTAs. -->
<!-- This tag is optional. If omitted, the remote address will be set
to 127.0.0.1 and the remote domain -->
<!-- will be set to 'localhost'. Both are almost always considered
legitimate. -->
<!-- index -->
<!-- The zero based index of the RECEIVED Header used to compute
the remote address and remote host name -->
<!-- of the MTA that delivered a fetched message. -->
<!-- Typically, the first (index = 0) RECEIVED Header is for the
local MTA that delivers mail to the message store -->
<!-- and the second RECEIVED Header (index = 1) is the remote
domain delivering mail to the MTA, so the second -->
<!-- RECEIVED Header is the one to use. -->
<!-- Some configurations will differ. Look at the RECEIVED
Headers and set the index to point to the first remote MTA. -->
<!-- An index of -1 is is interpreted as use 127.0.0.1 for the
remote address and use 'localhost' for the remote host name. -->
<!-- reject -->
<!-- if true, messages whose received header at the specified
index is invalid will be rejected -->
<!-- if false, messages whose received header at the specified
index is invalid will be accepted -->
<!-- and the Mail Attribute
"org.apache.james.fetchmail.isInvalidReceivedHeader" -->
<!-- will be added to the message. Use the HasMailAttribute
matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B]<remotereceivedheader index="1" reject="true" leaveonserver="true"
markseen="true"/>[/B]
<!-- Specify what happens to messages whose size exceeds the
specified limit. -->
<!-- This tag is optional. If omitted, there is no limit. -->
<!-- limit -->
<!-- The maximum message size in Kilobytes of messages injected
into James. -->
<!-- A value of 0 means no limit. -->
<!-- reject -->
<!-- if true, messages whose size exceeds the limit will be
rejected -->
<!-- if false, messages whose size exceeds the limit will be
stripped of their message bodies -->
<!-- prior to injection into James and the MailAttribute
"org.apache.james.fetchmail.isMaxMessageSizeExceeded" -->
<!-- will be added to the message with the value set to the
original message size in bytes. -->
<!-- Use the HasMailAttribute matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B] <maxmessagesize limit="0" reject="false" leaveonserver="true"
markseen="true"/>[/B]
<!-- Specify what happens to undeliverable messages -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as seen
-->
<!-- if false, messages left on the server will not be marked as
seen -->
[B]<undeliverable leaveonserver="true" markseen="true"/>[/B]
<!-- Specify what happens to messages for which a recipient cannot be
determined. -->
<!-- defer -->
<!-- if true, processing of messages for which a recipient cannot
be determined will deferred -->
<!-- until the next fetch of the Account. This gives an
opportunity for other Accounts in the -->
<!-- fetch task to determine the recipient and process the mail.
-->
<!-- if false, messages for which a recipient cannot be
determined are processed immediately. -->
<!-- reject -->
<!-- if true, messages for which a recipient cannot be determined
will be rejected -->
<!-- if false, messages for which a recipient cannot be
determined will be accepted, -->
<!-- the account recipient will be used and the MailAttribute
"org.apache.james.fetchmail.isRecipientNotFound" -->
<!-- will be added to the message. Use the HasMailAttribute
matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B]<recipientnotfound defer="true" reject="true" leaveonserver="true"
markseen="false"/> [/B]
<!-- Specify a list of recipients for whom messages will be rejected
-->
<!-- and what happens to rejected messages. -->
<!-- The list can be comma, tab or space delimited. -->
<!-- reject -->
<!-- if true, messages for users on the blacklist will be
rejected -->
<!-- if false, messages for users on the blacklist will be
accepted -->
<!-- and the Mail Attribute
"org.apache.james.fetchmail.isBlacklistedRecipient" -->
<!-- will be added to the message. Use the HasMailAttribute
matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B]<blacklist reject="true" leaveonserver="true" markseen="false">
wibble@localhost, flobble@localhost </blacklist>[/B]
<!-- Specify if messages for users who are not defined to James
should -->
<!-- be rejected and what happens to rejected messages. -->
<!-- reject -->
<!-- if true, messages for users who are not defined to James
will be rejected -->
<!-- if false, messages for users who are not defined to James
will be accepted -->
<!-- and the Mail Attribute
"org.apache.james.fetchmail.isUserUndefined" -->
<!-- will be added to the message. Use the HasMailAttribute
matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B] <userundefined reject="true" leaveonserver="true" markseen="false"
/>[/B]
<!-- Specify if messages for recipients on remote hosts should -->
<!-- be rejected and what happens to rejected messages. -->
<!-- reject -->
<!-- if true, messages for remote recipients will be rejected
-->
<!-- if false, messages for remote recipients will be accepted
-->
<!-- and the Mail Attribute
"org.apache.james.fetchmail.isRemoteRecipient" -->
<!-- will be added to the message. Use the HasMailAttribute
matcher to detect them. -->
<!-- The following apply if reject="true" and a message is
rejected... -->
<!-- leaveonserver -->
<!-- if true, messages will be left on the server -->
<!-- if false, messages will be deleted from the server -->
<!-- markseen -->
<!-- if true, messages left on the server will be marked as
seen -->
<!-- if false, messages left on the server will not be marked
as seen -->
[B]<remoterecipient reject="true" leaveonserver="true"
markseen="false" />[/B]
</fetch>
</fetchmail>
[/CODE]
Thank you guys for your help.
