Best regards,
Daniil
From: "serguei.spit...@oracle.com" <serguei.spit...@oracle.com>
Date: Tuesday, September 17, 2019 at 1:53 AM
To: Daniil Titov <daniil.x.ti...@oracle.com>, Robbin Ehn <robbin....@oracle.com>, David Holmes <david.hol...@oracle.com>,
<daniel.daughe...@oracle.com>, OpenJDK Serviceability <serviceability-dev@openjdk.java.net>,
"hotspot-runtime-...@openjdk.java.net" <hotspot-runtime-...@openjdk.java.net>, "jmx-...@openjdk.java.net"
<jmx-...@openjdk.java.net>, Claes Redestad <claes.redes...@oracle.com>
Subject: Re: RFR: 8185005: Improve performance of
ThreadMXBean.getThreadInfo(long ids[], int maxDepth)
Hi Daniil,
Thank you for you patience in working on this issue!
Also, I like that the current thread related optimizations in management.cpp
were factored out.
It was a good idea to separate them.
I have a concern about the checks for thread->is_exiting().
The threads are added to and removed from the ThreadTable under protection of
Threads_lock.
However, the thread->is_exiting() checks are not protected, and so, they are
racy.
There is a couple of such checks to mention:
611 JavaThread* ThreadsList::find_JavaThread_from_java_tid(jlong java_tid)
const {
612 ThreadTable::lazy_initialize(this);
613 JavaThread* thread = ThreadTable::find_thread_by_tid(java_tid);
614 if (thread == NULL) {
615 // If the thread is not found in the table find it
616 // with a linear search and add to the table.
617 for (uint i = 0; i < length(); i++) {
618 thread = thread_at(i);
619 oop tobj = thread->threadObj();
620 // Ignore the thread if it hasn't run yet, has exited
621 // or is starting to exit.
622 if (tobj != NULL && java_tid == java_lang_Thread::thread_id(tobj)) {
623 MutexLocker ml(Threads_lock);
624 // Must be inside the lock to ensure that we don't add the thread
to the table
625 // that has just passed the removal point in
ThreadsSMRSupport::remove_thread()
626 if (!thread->is_exiting()) {
627 ThreadTable::add_thread(java_tid, thread);
628 return thread;
629 }
630 }
631 }
632 } else if (!thread->is_exiting()) {
633 return thread;
634 }
635 return NULL;
636 }
...
93 void ThreadTable::lazy_initialize(const ThreadsList *threads) {
94 if (!_is_initialized) {
95 {
96 MutexLocker ml(ThreadTableCreate_lock);
97 if (!_is_initialized) {
98 create_table(threads->length());
99 _is_initialized = true;
100 }
101 }
102 for (uint i = 0; i < threads->length(); i++) {
103 JavaThread* thread = threads->thread_at(i);
104 oop tobj = thread->threadObj();
105 if (tobj != NULL && !thread->is_exiting()) {
106 jlong java_tid = java_lang_Thread::thread_id(tobj);
107 add_thread(java_tid, thread);
108 }
109 }
110 }
111 }
A thread may start exiting right after the checks at the lines 626 and 105.
So that:
- the lines 632-633 are useless as they do not really protect from returning
an exiting thread
- the lines 105-108 can result in adding exiting threads into the ThreadTable
Please, note, the lines 626-629 are safe in terms of addition to the
ThreadTable as they
are protected with the Threads_lock. But the returned thread still can exit
after that.
It is interesting what might happen if an exiting thread is returned by the
ThreadsList::find_JavaThread_from_java_tid ().
Does it make sense to develop a test that would cover these cases?
Thanks,
Serguei
On 9/16/19 11:18, Daniil Titov wrote:
Hello,
After investigating with Claes the impact of this change on the performance
(thanks a lot Claes for helping with it!) the conclusion was that the impact on
the thread startup time is not a blocker for this change.
I also measured the memory footprint using Native Memory Tracking and results
showed around 40 bytes per live thread.
Please review a new version of the fix, webrev.06 [1]. Just to remind,
webrev.05 was abandoned and webrev.06 [1] is webrev.04 [3] minus changes in
src/hotspot/share/services/management.cpp (that were factored out to a separate
issue [4]) and plus a change in ThreadsList::find_JavaThread_from_java_tid()
method (please, see below) that addresses the problem Robbin found and puts
the code that adds a new thread to the thread table inside Threads_lock.
src/hotspot/share/runtime/threadSMR.cpp
622 if (tobj != NULL && java_tid == java_lang_Thread::thread_id(tobj)) {
623 MutexLocker ml(Threads_lock);
624 // Must be inside the lock to ensure that we don't add the thread
to the table
625 // that has just passed the removal point in
ThreadsSMRSupport::remove_thread()
626 if (!thread->is_exiting()) {
627 ThreadTable::add_thread(java_tid, thread);
628 return thread;
629 }
630 }
[1] Webrev: https://cr.openjdk.java.net/~dtitov/8185005/webrev.06
[2] Bug: https://bugs.openjdk.java.net/browse/JDK-8185005
[3] https://cr.openjdk.java.net/~dtitov/8185005/webrev.04
[4] https://bugs.openjdk.java.net/browse/JDK-8229391
Thank you,
Daniil
>
> On 8/4/19, 7:54 PM, "David Holmes" mailto:david.hol...@oracle.com
wrote:
>
> Hi Daniil,
>
> On 3/08/2019 8:16 am, Daniil Titov wrote:
> > Hi David,
> >
> > Thank you for your detailed review. Please review a new
version of the fix that includes
> > the changes you suggested:
> > - ThreadTableCreate_lock scope is reduced to cover the
creation of the table only;
> > - ThreadTableCreate_lock is made _safepoint_check_always;
>
> Okay.
>
> > - ServiceThread is no longer responsible for the resizing of
the thread table, instead,
> > the thread table is changed to grow on demand by the
thread that is doing the addition;
>
> Okay - I'm happy to get the serviceThread out of the picture
here.
>
> > - fixed nits and formatting issues.
>
> Okay.
>
> >>> The change also includes additional optimization for some
callers of find_JavaThread_from_java_tid()
> >>> as Daniel suggested.
> >> Not sure it's best to combine these, but if they are limited
to the
> >> changes in management.cpp only then that may be okay.
> >
> > The additional optimization for some callers of
find_JavaThread_from_java_tid() is
> > limited to management.cpp (plus a new test) so I left them in
the webrev but
> > I also could move it in the separate issue if required.
>
> I'd prefer this part of be separated out, but won't insist.
Let's see if
> Dan or Serguei have a strong opinion.
>
> > > src/hotspot/share/runtime/threadSMR.cpp
> > >755 jlong tid = SharedRuntime::get_java_tid(thread);
> > > 926 jlong tid = SharedRuntime::get_java_tid(thread);
> > > I think it cleaner/better to just use
> > > jlong tid =
java_lang_Thread::thread_id(thread->threadObj());
> > > as we know thread is not NULL, it is a JavaThread and it
has to have a
> > > non-null threadObj.
> >
> > I had to leave this code unchanged since it turned out the
threadObj is null
> > when VM is destroyed:
> >
> > V [libjvm.so+0xe165d7] oopDesc::long_field(int) const+0x67
> > V [libjvm.so+0x16e06c6]
ThreadsSMRSupport::add_thread(JavaThread*)+0x116
> > V [libjvm.so+0x16d1302] Threads::add(JavaThread*, bool)+0x82
> > V [libjvm.so+0xef8369] attach_current_thread.part.197+0xc9
> > V [libjvm.so+0xec136c] jni_DestroyJavaVM+0x6c
> > C [libjli.so+0x4333] JavaMain+0x2c3
> > C [libjli.so+0x8159] ThreadJavaMain+0x9
>
> This is actually nothing to do with the VM being destroyed, but
is an
> issue with JNI_AttachCurrentThread and its interaction with the
> ThreadSMR iterators. The attach process is:
> - create JavaThread
> - mark as "is attaching via jni"
> - add to ThreadsList
> - create java.lang.Thread object (you can only execute Java
code after
> you are attached)
> - mark as "attach completed"
>
> So while a thread "is attaching" it will be seen by the
ThreadSMR thread
> iterator but will have a NULL java.lang.Thread object.
>
> We special-case attaching threads in a number of places in the
VM and I
> think we should be explicitly doing something here to filter out
> attaching threads, rather than just being tolerant of a NULL
j.l.Thread
> object. Specifically in ThreadsSMRSupport::add_thread:
>
> if (ThreadTable::is_initialized() &&
!thread->is_attaching_via_jni()) {
> jlong tid = java_lang_Thread::thread_id(thread->threadObj());
> ThreadTable::add_thread(tid, thread);
> }
>
> Note that in ThreadsSMRSupport::remove_thread we can use the
same guard,
> which covers the case the JNI attach encountered an error
trying to
> create the j.l.Thread object.
>
> >> src/hotspot/share/services/threadTable.cpp
> >> 71 static uintx get_hash(Value const& value, bool*
is_dead) {
> >
> >> The is_dead parameter still bothers me here. I can't make
enough sense
> >> out of the template code in ConcurrentHashtable to see why
we have to
> >> have it, but I'm concerned that its very existence means we
perhaps
> >> should not be trying to extend CHT in this context. ??
> >
> > My understanding is that is_dead parameter provides a
mechanism for
> > ConcurrentHashtable to remove stale entries that were not
explicitly
> > removed by calling ConcurrentHashTable::remove() method.
> > I think that just because in our case we don't use this
mechanism doesn't
> > mean we should not use ConcurrentHashTable.
>
> Can you confirm that this usage is okay with Robbin Ehn please.
He's
> back from vacation this week.
>
> >> I would still want to see what impact this has on thread
> >> startup cost, both with and without the table being
initialized.
> >
> > I run a test that initializes the table by calling
ThreadMXBean.get getThreadInfo(),
> > starts some threads as a worm-up, and then creates and starts
100,000 threads
> > (each thread just sleeps for 100 ms). In case when the thread
table is enabled
> > 100,000 threads are created and started for about 15200 ms.
If the thread table
> > is off the test takes about 14800 ms. Based on this
information the enabled
> > thread table makes the thread startup about 2.7% slower.
>
> That doesn't sound very good. I think we may need to Claes
involved to
> help investigate overall performance impact here.
>
> > Webrev: https://cr.openjdk.java.net/~dtitov/8185005/webrev.04/
> > Bug: https://bugs.openjdk.java.net/browse/JDK-8185005
>
> No further code comments.
>
> I didn't look at the test in detail.
>
> Thanks,
> David
>
> > Thanks!
> > --Daniil
> >
> >
> > On 7/29/19, 12:53 AM, "David Holmes"
mailto:david.hol...@oracle.com wrote:
> >
> > Hi Daniil,
> >
> > Overall I think this is a reasonable approach but I
would still like to
> > see some performance and footprint numbers, both to
verify it fixes the
> > problem reported, and that we are not getting penalized
elsewhere.
> >
> > On 25/07/2019 3:21 am, Daniil Titov wrote:
> > > Hi David, Daniel, and Serguei,
> > >
> > > Please review the new version of the fix, that makes
the thread table initialization on demand and
> > > moves it inside
ThreadsList::find_JavaThread_from_java_tid(). At the creation time the thread table
> > > is initialized with the threads from the current
thread list. We don't want to hold Threads_lock
> > > inside find_JavaThread_from_java_tid(), thus new
threads still could be created while the thread
> > > table is being initialized . Such threads will be
found by the linear search and added to the thread table
> > > later, in ThreadsList::find_JavaThread_from_java_tid().
> >
> > The initialization allows the created but unpopulated,
or partially
> > populated, table to be seen by other threads - is that
your intention?
> > It seems it should be okay as the other threads will
then race with the
> > initializing thread to add specific entries, and this is
a concurrent
> > map so that should be functionally correct. But if so
then I think you
> > can also reduce the scope of the ThreadTableCreate_lock
so that it
> > covers creation of the table only, not the initial
population of the table.
> >
> > I like the approach of only initializing the table when
needed and using
> > that to control when the add/remove-thread code needs to
update the
> > table. But I would still want to see what impact this
has on thread
> > startup cost, both with and without the table being
initialized.
> >
> > > The change also includes additional optimization for
some callers of find_JavaThread_from_java_tid()
> > > as Daniel suggested.
> >
> > Not sure it's best to combine these, but if they are
limited to the
> > changes in management.cpp only then that may be okay. It
helps to be
> > able to focus on the table related changes without being
distracted by
> > other optimizations.
> >
> > > That is correct that ResolvedMethodTable was used as a
blueprint for the thread table, however, I tried
> > > to strip it of the all functionality that is not
required in the thread table case.
> >
> > The revised version seems better in that regard. But I
still have a
> > concern, see below.
> >
> > > We need to have the thread table resizable and allow
it to grow as the number of threads increases to avoid
> > > reserving excessive memory a-priori or deteriorating
lookup times. The ServiceThread is responsible for
> > > growing the thread table when required.
> >
> > Yes but why? Why can't this table be grown on demand by
the thread that
> > is doing the addition? For other tables we may have to
delegate to the
> > service thread because the current thread cannot perform
the action, or
> > it doesn't want to perform it at the time the need for
the resize is
> > detected (e.g. its detected at a safepoint and you want
the resize to
> > happen later outside the safepoint). It's not apparent
to me that such
> > restrictions apply here.
> >
> > > There is no ConcurrentHashTable available in Java 8
and for backporting this fix to Java 8 another implementation
> > > of the hash table, probably originally suggested in
the patch attached to the JBS issue, should be used. It will make
> > > the backporting more complicated, however, adding a
new Implementation of the hash table in Java 14 while it
> > > already has ConcurrentHashTable doesn't seem
reasonable for me.
> >
> > Ok.
> >
> > > Webrev:
http://cr.openjdk.java.net/~dtitov/8185005/webrev.03
> >
> > Some specific code comments:
> >
> > src/hotspot/share/runtime/mutexLocker.cpp
> >
> > + def(ThreadTableCreate_lock , PaddedMutex ,
special,
> > false, Monitor::_safepoint_check_never);
> >
> > I think this needs to be a _safepoint_check_always lock.
The table will
> > be created by regular JavaThreads and they should
(nearly) always be
> > checking for safepoints if they are going to block
acquiring the lock.
> > And it isn't at all obvious that the thread doing the
creation can't go
> > to a safepoint whilst this lock is held.
> >
> > ---
> >
> > src/hotspot/share/runtime/threadSMR.cpp
> >
> > Nit:
> >
> > 618 JavaThread* thread = thread_at(i);
> >
> > you could reuse the new java_thread local you introduced
at line 613 and
> > just rename that "new" variable to "thread" so you don't
have to change
> > all other uses.
> >
> > 628 } else if (java_thread != NULL && ...
> >
> > You don't need to check != NULL here as you only get
here when
> > java_thread is not NULL.
> >
> > 755 jlong tid =
SharedRuntime::get_java_tid(thread);
> > 926 jlong tid =
SharedRuntime::get_java_tid(thread);
> >
> > I think it cleaner/better to just use
> >
> > jlong tid =
java_lang_Thread::thread_id(thread->threadObj());
> >
> > as we know thread is not NULL, it is a JavaThread and it
has to have a
> > non-null threadObj.
> >
> > ---
> >
> > src/hotspot/share/services/management.cpp
> >
> > 1323 if (THREAD->is_Java_thread()) {
> > 1324 JavaThread* current_thread =
(JavaThread*)THREAD;
> >
> > These calls can only be made on a JavaThread so this be
simplified to
> > remove the is_Java_thread() call. Similarly in other
places.
> >
> > ---
> >
> > src/hotspot/share/services/threadTable.cpp
> >
> > 55 class ThreadTableEntry : public
CHeapObj<mtInternal> {
> > 56 private:
> > 57 jlong _tid;
> >
> > I believe hotspot style is to not indent the access
modifiers in C++
> > class declarations, so the above would just be:
> >
> > 55 class ThreadTableEntry : public
CHeapObj<mtInternal> {
> > 56 private:
> > 57 jlong _tid;
> >
> > etc.
> >
> > 60 ThreadTableEntry(jlong tid, JavaThread*
java_thread) :
> > 61 _tid(tid),_java_thread(java_thread) {}
> >
> > line 61 should be indented as it continues line 60.
> >
> > 67 class ThreadTableConfig : public AllStatic {
> > ...
> > 71 static uintx get_hash(Value const& value,
bool* is_dead) {
> >
> > The is_dead parameter still bothers me here. I can't
make enough sense
> > out of the template code in ConcurrentHashtable to see
why we have to
> > have it, but I'm concerned that its very existence means
we perhaps
> > should not be trying to extend CHT in this context. ??
> >
> > 115 size_t start_size_log = size_log >
DefaultThreadTableSizeLog
> > 116 ? size_log : DefaultThreadTableSizeLog;
> >
> > line 116 should be indented, though in this case I think
a better layout
> > would be:
> >
> > 115 size_t start_size_log =
> > 116 size_log > DefaultThreadTableSizeLog ?
size_log :
> > DefaultThreadTableSizeLog;
> >
> > 131 double ThreadTable::get_load_factor() {
> > 132 return (double)_items_count/_current_size;
> > 133 }
> >
> > Not sure that is doing what you want/expect. It will
perform integer
> > division and then cast that whole integer to a double.
If you want
> > double arithmetic you need:
> >
> > return ((double)_items_count)/_current_size;
> >
> > 180 jlong _tid;
> > 181 uintx _hash;
> >
> > Nit: no need for all those spaces before the variable
name.
> >
> > 183 ThreadTableLookup(jlong tid)
> > 184 : _tid(tid), _hash(primitive_hash(tid)) {}
> >
> > line 184 should be indented.
> >
> > 201 ThreadGet():_return(NULL) {}
> >
> > Nit: need space after :
> >
> > 211 assert(_is_initialized, "Thread table is not
initialized");
> > 212 _has_work = false;
> >
> > line 211 is indented one space too far.
> >
> > 229 ThreadTableEntry* entry = new
ThreadTableEntry(tid,java_thread);
> >
> > Nit: need space after ,
> >
> > 252 return _local_table->remove(thread,lookup);
> >
> > Nit: need space after ,
> >
> > Thanks,
> > David
> > ------
> >
> > > Bug: https://bugs.openjdk.java.net/browse/JDK-8185005
> > >
> > > Thanks!
> > > --Daniil
> > >
> > >
> > > On 7/8/19, 3:24 PM, "Daniel D. Daugherty"
mailto:daniel.daughe...@oracle.com wrote:
> > >
> > > On 6/29/19 12:06 PM, Daniil Titov wrote:
> > > > Hi Serguei and David,
> > > >
> > > > Serguei is right,
ThreadTable::find_thread(java_tid) cannot return a JavaThread with an unmatched java_tid.
> > > >
> > > > Please find a new version of the fix that
includes the changes Serguei suggested.
> > > >
> > > > Regarding the concern about the maintaining the
thread table when it may never even be queried, one of
> > > > the options could be to add ThreadTable ::isEnabled flag,
set it to "false" by default, and wrap the calls to the thread table
> > > > in ThreadsSMRSupport add_thread() and
remove_thread() methods to check this flag.
> > > >
> > > > When
ThreadsList::find_JavaThread_from_java_tid() is called for the first time it could check if
ThreadTable ::isEnabled
> > > > Is on and if not then set it on and populate
the thread table with all existing threads from the thread list.
> > >
> > > I have the same concerns as David H. about this
new ThreadTable.
> > > ThreadsList::find_JavaThread_from_java_tid() is
only called from code
> > > in src/hotspot/share/services/management.cpp so I
think that table
> > > needs to enabled and populated only if it is
going to be used.
> > >
> > > I've taken a look at the webrev below and I see
that David has
> > > followed up with additional comments. Before I do
a crawl through
> > > code review for this, I would like to see the
ThreadTable stuff
> > > made optional and David's other comments
addressed.
> > >
> > > Another possible optimization is for callers of
> > > find_JavaThread_from_java_tid() to save the
calling thread's
> > > tid value before they loop and if the current tid
== saved_tid
> > > then use the current JavaThread* instead of
calling
> > > find_JavaThread_from_java_tid() to get the
JavaThread*.
> > >
> > > Dan
> > >
> > > >
> > > > Webrev:
https://cr.openjdk.java.net/~dtitov/8185005/webrev.02/
> > > > Bug:
https://bugs.openjdk.java.net/browse/JDK-8185005
> > > >
> > > > Thanks!
> > > > --Daniil
> > > >
> > > > From: mailto:serguei.spit...@oracle.com
> > > > Organization: Oracle Corporation
> > > > Date: Friday, June 28, 2019 at 7:56 PM
> > > > To: Daniil Titov
mailto:daniil.x.ti...@oracle.com, OpenJDK Serviceability
mailto:serviceability-dev@openjdk.java.net, mailto:hotspot-runtime-...@openjdk.java.net
mailto:hotspot-runtime-...@openjdk.java.net, mailto:jmx-...@openjdk.java.net
mailto:jmx-...@openjdk.java.net
> > > > Subject: Re: RFR: 8185005: Improve performance
of ThreadMXBean.getThreadInfo(long ids[], int maxDepth)
> > > >
> > > > Hi Daniil,
> > > >
> > > > I have several quick comments.
> > > >
> > > > The indent in the hotspot c/c++ files has to be
2, not 4.
> > > >
> > > >
https://cr.openjdk.java.net/~dtitov/8185005/webrev.01/src/hotspot/share/runtime/threadSMR.cpp.frames.html
> > > > 614 JavaThread*
ThreadsList::find_JavaThread_from_java_tid(jlong java_tid) const {
> > > > 615 JavaThread* java_thread =
ThreadTable::find_thread(java_tid);
> > > > 616 if (java_thread == NULL && java_tid
== PMIMORDIAL_JAVA_TID) {
> > > > 617 //
ThreadsSMRSupport::add_thread() is not called for the primordial
> > > > 618 // thread. Thus, we find this
thread with a linear search and add it
> > > > 619 // to the thread table.
> > > > 620 for (uint i = 0; i < length();
i++) {
> > > > 621 JavaThread* thread =
thread_at(i);
> > > > 622 if
(is_valid_java_thread(java_tid,thread)) {
> > > > 623
ThreadTable::add_thread(java_tid, thread);
> > > > 624 return thread;
> > > > 625 }
> > > > 626 }
> > > > 627 } else if (java_thread != NULL &&
is_valid_java_thread(java_tid, java_thread)) {
> > > > 628 return java_thread;
> > > > 629 }
> > > > 630 return NULL;
> > > > 631 }
> > > > 632 bool
ThreadsList::is_valid_java_thread(jlong java_tid, JavaThread* java_thread) {
> > > > 633 oop tobj = java_thread->threadObj();
> > > > 634 // Ignore the thread if it hasn't run
yet, has exited
> > > > 635 // or is starting to exit.
> > > > 636 return (tobj != NULL &&
!java_thread->is_exiting() &&
> > > > 637 java_tid ==
java_lang_Thread::thread_id(tobj));
> > > > 638 }
> > > >
> > > > 615 JavaThread* java_thread =
ThreadTable::find_thread(java_tid);
> > > >
> > > > I'd suggest to rename find_thread() to
find_thread_by_tid().
> > > >
> > > > A space is missed after the comma:
> > > > 622 if
(is_valid_java_thread(java_tid,thread)) {
> > > >
> > > > An empty line is needed before L632.
> > > >
> > > > The name 'is_valid_java_thread' looks wrong (or
confusing) to me.
> > > > Something like
'is_alive_java_thread_with_tid()' would be better.
> > > > It'd better to list parameters in the opposite
order.
> > > >
> > > > The call to is_valid_java_thread() is confusing:
> > > > 627 } else if (java_thread != NULL &&
is_valid_java_thread(java_tid, java_thread)) {
> > > >
> > > > Why would the call
ThreadTable::find_thread(java_tid) return a JavaThread with an unmatched java_tid?
> > > >
> > > >
> > > > Thanks,
> > > > Serguei
> > > >
> > > > On 6/28/19, 9:40 PM, "David Holmes"
mailto:david.hol...@oracle.com wrote:
> > > >
> > > > Hi Daniil,
> > > >
> > > > The definition and use of this hashtable
(yet another hashtable
> > > > implementation!) will need careful
examination. We have to be concerned
> > > > about the cost of maintaining it when it
may never even be queried. You
> > > > would need to look at footprint cost and
performance impact.
> > > >
> > > > Unfortunately I'm just about to board a
plane and will be out for the
> > > > next few days. I will try to look at this
asap next week, but we will
> > > > need a lot more data on it.
> > > >
> > > > Thanks,
> > > > David
> > > >
> > > > On 6/28/19 3:31 PM, Daniil Titov wrote:
> > > > Please review the change that improves
performance of ThreadMXBean MXBean methods returning the
> > > > information for specific threads. The change
introduces the thread table that uses ConcurrentHashTable
> > > > to store one-to-one the mapping between the
thread ids and JavaThread objects and replaces the linear
> > > > search over the thread list in
ThreadsList::find_JavaThread_from_java_tid(jlong tid) method with the lookup
> > > > in the thread table.
> > > >
> > > > Testing: Mach5 tier1,tier2 and tier3 tests
successfully passed.
> > > >
> > > > Webrev:
https://cr.openjdk.java.net/~dtitov/8185005/webrev.01/
> > > > Bug:
https://bugs.openjdk.java.net/browse/JDK-8185005
> > > >
> > > > Thanks!
> > > >
> > > > Best regards,
> > > > Daniil
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> >
> >
> >
>
>
>
