Hi,
I followed the instructions. Changed the default ports for clients from
8800 and 8801 to 8101 and 8102. Seems to start OK.
j...@ws0:/etc/bind$ sudo /usr/local/Plone/zeocluster/bin/plonectl status
zeoserver: program running; pid=18196
client1: program running; pid=18207
client2: program running; pid=18204
But I get 'Access Denied.' when I go to
http://localhost:8101/manager, or to
http://localhost:8101/Plone
After a few minutes I get
j...@ws0:/etc/bind$ sudo /usr/local/Plone/zeocluster/bin/plonectl status
zeoserver: program running; pid=18196
client1: daemon manager not running
client2: program running; pid=18204
There's nothing in
/usr/local/Plone$ cat zeocluster/parts/zeoserver/log/,
/usr/local/Plone$ cat zeocluster/parts/client1/log/, or
/usr/local/Plone$ cat zeocluster/parts/client1/log/
Where should I look for the problem?
Thanks.
--
"This message may have been intercepted and read by U.S. government
agencies including the FBI, CIA, and NSA or by the Thai Ministry of
Justice without notice or warrant or knowledge of sender or recipient."
John Francis Lee
1025/37 Thanon Jet Yod
T.Wiang A.Mueang J.Chiangrai 57000
Thailand
_______________________________________________
Setup mailing list
[email protected]
http://lists.plone.org/mailman/listinfo/setup
