Hallo Miodrag,
in your comment on undeadly
(http://undeadly.org/cgi?action=article&sid=20120426184930&pid=6) you've
requested me to send you a hardware specification of my Indigo2. So here
it is:
>> version
PROM Monitor SGI Version 5.3 Rev E IP22 Sep 28, 1995 (BE)
>> hinv
System: IP22
Processor: 250 Mhz R4400, with FPU
Primary I-cache size: 16 Kbytes
Primary D-cache size: 16 Kbytes
Secondary cache size: 2048 Kbytes
Memory size: 128 Mbytes
Graphics: MG10 Impact
SCSI Disk: scsi(0)disk(1)
SCSI Disk: Controller 0, ID 2, removable media
Audio: Iris Audio Processor: version A2 revision 1.1.0
>> hinv -v -t -p
system ARC SGI-IP22 key 0
processor CPU MIPS-R4400 key 0
processor FPU MIPS-R4400FPC key 0
cache primary icache 16 Kbytes (block 1 lines, line 16 bytes)
cache primary dcache 16 Kbytes (block 1 lines, line 16 bytes)
cache secondary cache 2048 Kbytes (block 1 lines, line 128 bytes)
memory main 128 Mbytes
controller display MG10 Impact key 0 ( ConsoleOut Output )
p: video(0)
peripheral monitor key 0
p: video(0)monitor(0)
controller network ec0 key 0
v: net SEEQ NQ8003 - type: Ethernet MTU: 1500 HW: 8:0:69:9:8d:df
p: network(0)
peripheral network key 0 ( Input Output )
p: network(0)network(0)
adapter SCSI WD33C93B key 0
p: scsi(0)
controller disk SGI QUANTUM XP34300 key 1
p: scsi(0)disk(1)
peripheral disk unit 0 ( Input Output )
v: scsidisk - - - blocksize: 512 maxblocks: 8813869
p: scsi(0)disk(1)rdisk(0)
controller disk INSITE I325VM *F key 2
p: scsi(0)disk(2)
peripheral floppy disk key 0 ( Removable Input Output )
v: floppy - - -
p: scsi(0)disk(2)fdisk(0)
adapter SCSI WD33C93B key 1
p: scsi(1)
controller serial IP22 tty key 0
p: serial(0)
peripheral line key 0 ( ConsoleIn ConsoleOut Input Output )
p: serial(0)line(0)
controller serial IP22 tty key 1
p: serial(1)
peripheral line key 0 ( ConsoleIn ConsoleOut Input Output )
p: serial(1)line(0)
controller audio HAL2 key 4112 ( Input Output )
p: audio(4112)
controller keyboard pckbd key 0
p: key(0)
peripheral keyboard key 0 ( ReadOnly ConsoleIn Input )
p: key(0)keyboard(0)
controller pointer pcms key 0
p: pointer(0)
peripheral pointer key 0 ( ReadOnly Input )
p: pointer(0)pointer(0)
As I said in my comment, the system hung right after "Found SGI-IP22,
setting up." It happens both on glass and serial console.
>> bootp()bootecoff bootp()bsd.rd.IP22
Setting $netaddr to 192.168.28.42 (from server )
Obtaining bootecoff from server
38720+208+2080 entry: 0x880020f0
OpenBSD/sgi-IP22 ARCBios boot version 1.1
arg 0: bootp()bootecoff
arg 1: bootp()bsd.rd.IP22
arg 2: ConsoleIn=serial(0)
arg 3: ConsoleOut=serial(0)
arg 4: SystemPartition=scsi(0)disk(1)rdisk(0)partition(8)
arg 5: OSLoader=sash
arg 6: OSLoadPartition=scsi(0)disk(1)rdisk(0)partition(0)
arg 7: OSLoadFilename=/unix
Boot: bootp()bsd.rd.IP22
Setting $netaddr to 192.168.28.42 (from server )
Obtaining bsd.rd.IP22 from server
Setting $netaddr to 192.168.28.42 (from server )
Obtaining bsd.rd.IP22 from server
6938992+904080 [91Setting $netaddr to 192.168.28.42 (from server )
Obtaining bsd.rd.IP22 from server
+122640+69813]=0x7aa068
ARCS32 Firmware Version 1.10
Found SGI-IP22, setting up.
In your next comment, you say, it may be fixed in next snapshot. I'll
give you a feedback, when I've tested it.
\\wbr
Dimitri Sokolyuk
PS: Sorry for the late answer. I haven't seen you comment at right time.
