If you're interested in testing STN H.323 support, please read the
following:
I've downloaded it and installed the H.323 module. Unfortunately, I don't
have the equipment to test it (especially video). If you could test it,
that would be great. I've made it as simple as possible:
1) Cut your STN diskette with debug support on.
2) Attach a kb and monitor
3) Boot STN
4) Alt-F8
5) Type "Of Mice and Men<CR>" for a shell prompt
6) Type "cd /lib/modules"
7) Type "snarf ftp://www.sharethenet.com/pub/ip_masq_h3231.o"
8) Type "insmod ip_masq_h3231.o"
9) test test test :)
10) Report results
Regards,
John Lombardo
BTW, I didn't look at the code very closely, but without some sort of gate
keeper, I don't see how you'll be able to receive calls, so this is
probably for outbound calls only. It should be possible to allow for
inbound calls to a single machine by forwarding port 1720 into a specific
machine, but this will only work for one box.
--
Visit http://www.ShareTheNet.com for info about ShareTheNet
Visit http://www.topica.com/lists/sharethenet for info about this list
________________________________________________________________________
Start an Email List For Free at Topica. http://www.topica.com/register
