I have the same card and use the tulip driver - can't remember but I might
have downloaded a new tulip driver - I know I found it on the web but don't
know if I ended up using it - if you email back I will check it when I get
home tonight and tell you the driver version I'm using.
- Dan
> -----Original Message-----
> From: Robert F. Hogan [mailto:[EMAIL PROTECTED]]
> Sent: Friday, February 04, 2000 12:25 PM
> To: [EMAIL PROTECTED]
> Subject: [ShareTheNet] Kingston KNE100TX
>
>
> I have recently upgraded to a cable modem and now I can't seem to get
> STN to recognize the NIC that my provider installed. Unfortunately I
> didn't stop and think and then STOP the ISP from installing
> their card.
>
> I am using a LINKSYS PCI card which is recognized just fine
> by STN and I
> can Admin to my machine. But the Kingston card which is a
> KNE100TX (the
> 21143 type) is not even seen when STN boots. Hence no access
> to my cable
> modem.
> I'm using STN 2.1.3 and I have tried:
> NE2000,
> NE2000 compatible and
> the untested driver for DEC tulip (which the Kingston is I believe).
> the tulip driver never sees this card.
> I have tried it with PNP disable and I have tried it with PNP enabled
> also.
> All with no luck. Any ideas on how to get the tulip driver to work?
> TIA...
>
>
> rfh
>
> --
> Visit http://www.ShareTheNet.com for info about ShareTheNet
> Visit http://www.topica.com/lists/sharethenet for info about this list
>
> _______________________________________________________
> Follow the U.S. presidential race on our Politics list!
> http://www.topica.com/lists/politics
>
--
Visit http://www.ShareTheNet.com for info about ShareTheNet
Visit http://www.topica.com/lists/sharethenet for info about this list
_______________________________________________________
Follow the U.S. presidential race on our Politics list!
http://www.topica.com/lists/politics
