Hi, Ed. I use the 10/100 version of these cards in my STN box. I use the "NE2000 or Compatible" drivers, not the Tulip drivers. I had to use the setup drivers that came with the card to take them off PNP and set one of them to base address 0x300, IRQ 11, and the other to 0x340, IRQ 10. I use the 0x300 one for my internal net. I specify the base addresses in the STN setup, but use AutoIRQ for the IRQ settings. It may sound obvious, but be sure you add the "0x" to the 300 and 340, as these are hex numbers. Yes, I learned this the hard way *LOL*. These are great, cheap cards, once you get them properly configured. Cheers, Carl > I'm trying to use a LinkSys LNE100TX card with STN. I'm using the > untested Tulip/DEC driver. As per other "tulip" posts here, used > Auto-IRQ and left the base address blank. "Eth0: Not Found" during boot > to diskette. Anyone else have more positive experiences with this card? > > Thx, > Ed --- Sponsor's Message -------------------------------------- Nova International Services is giving away 2 FREE airline tickets to places like, Paris, Hawaii, and Florida and other great locations! Plus, you'll get a FREE 30-day trial membership to Buyers' Reward saving you thousands of dollars on everything you buy! http://click.topica.com/aaaam7bz8Rp2bAfyICc/2FREEairtickets ------------------------------------------------------------ -- Visit http://www.ShareTheNet.com for info about ShareTheNet Visit http://www.topica.com/lists/sharethenet for info about this list ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
