Brian Hoard wrote:
> [...]
> I did have trouble trying to install a later version on IRIX.
> Since I don't know how to compile the source, I used a IRIX binary, which
> never worked.
> So, I'm still using 2.4 beta 8 which has been rock-solid.
Since you are happy with 2.4b8, there is no reason to bother. BUT: Did
anybody else experience problems with the IRIX binaries? We did not receive
any complaints so far (except from Brian, of course).
> [...]
> If you get success there, which I would think you will, try using the IP
> address in the Sharity GUI instead of the name.
DON'T DO THAT! Sharity will not work if you provide the IP address instead
of the name. Sharity NEEDS to know both, the name AND the IP address. If you
give only the address, it does not know the name and therefore can't
connect.
If you want to connect by IP address, please add a new entry in the "CIFS
Servers" section of the GUI. You can specify the name when you create the
entry and set the IP address (in expert mode) for this entry.
> [...]
> type this, substituting your PCs name, of course.
> cifslogin //YOUR-PC
That should be
cifslogin YOUR-PC
instead. Only the computer name, no slashes.
Regards, Christian.
--
Dipl.-Ing. Christian Starkjohann
Objective Development
mailto:[EMAIL PROTECTED] | http://www.obdev.at/
_______________________________________________
Sharity-talk mailing list
[EMAIL PROTECTED]
To unsubscribe see http://at.obdev.at/mailman/listinfo/sharity-talk
