*Hi*
*Recently, I met some problems in learning sheepdog.* *I have 2 machines. They information follow:* *Node1[10.198.3.141]* eth1 Link encap:Ethernet HWaddr FC:48:EF:2E:47:2B inet addr:10.198.3.141 Bcast:10.198.3.191 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:166041 errors:0 dropped:0 overruns:0 frame:0 TX packets:272247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:81563807 (77.7 MiB) TX bytes:35527000 (33.8 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:489642 errors:0 dropped:0 overruns:0 frame:0 TX packets:489642 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:54504426 (51.9 MiB) TX bytes:54504426 (51.9 MiB) *Node2[10.198.4.108]* eth1 Link encap:Ethernet HWaddr FC:48:EF:2E:69:8B inet addr:10.198.4.108 Bcast:10.198.4.127 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:113220 errors:0 dropped:0 overruns:0 frame:0 TX packets:66017 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:114656591 (109.3 MiB) TX bytes:18070118 (17.2 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:77863 errors:0 dropped:0 overruns:0 frame:0 TX packets:77863 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9968948 (9.5 MiB) TX bytes:9968948 (9.5 MiB) *They are not in the same ethernet switch.The corosync conf follow:* # Please read the corosync.conf.5 manual page compatibility: whitetank totem { version: 2 secauth: off threads: 0 interface { ringnumber: 0 bindnetaddr: 192.168.1.1 mcastaddr: 239.255.1.1 mcastport: 5405 ttl: 1 } } logging { fileline: off to_stderr: no to_logfile: yes to_syslog: yes logfile: /var/log/cluster/corosync.log debug: off timestamp: on logger_subsys { subsys: AMF debug: off } } amf { mode: disabled } *Two confs is same. My issue is that they not in the same cluster.* *Node1 input *"dog node list" Id Host:Port V-Nodes Zone 0 127.0.0.1:7000 64 16777343 Node2 input "dog node list" Id Host:Port V-Nodes Zone 0 127.0.0.1:7000 64 16777343 *Only two nodes in the same **ethernet switch can in the same cluster?* *help me,please...*
-- sheepdog mailing list sheepdog@lists.wpkg.org http://lists.wpkg.org/mailman/listinfo/sheepdog