Yes it will fit. No, you'll need new axles (87 and newer autos = bigger inboard splines, wider diff housings). You can use 1990 Omni w/automatic axles or modified minivan axles (cut and rewelded 1" shorter) Many use two driver's side axles with a standard K-based car/van intermediate shaft, this helps keep torque steer down a little.
I believe you'll also need an Omni/Charger Auto transmission mount, unless someone can confirm they are the same? I know the manual transmission mounts are different between the cars (offset is different in the bracket, but the rubber insert is the same) Make sure the gearing will work for your needs. A set of 1.22 transfer gears really wakes the auto cars up. Lock-up for the turbo cars didn't come into being until 1991. The TBI received it in 90 maybe? The V-6's went to the 4-speed A-604, which is not an easy swap by any means :) Good luck, Stefan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Sent: Tuesday, April 05, 2005 1:23 PM To: Shelby Dodge Subject: SD> Van Trans in SC Well I got a line on a A413 from an 89 Van. Will my axles shafst fit this? IS this a non-lockup style? -----------------------REMOVE-FOOTER-WHEN-REPLYING---------------------------- Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html