Hugo, Did you try doing anything about the error you were getting? Or did you keep running the same commands ignoring the fact that xpra was complaining about a missing dependency? The error seems pretty clear about a fatal error, so I don't think a try/except would be helpful.
On Mon, Jun 9, 2014 at 7:46 AM, Eric Blade <[email protected]> wrote: > ... Perhaps you should try the more user-friendly front-end > http://winswitch.org/ instead of xpra directly. > > > > On Mon, Jun 9, 2014 at 3:04 AM, Hugo <[email protected]> wrote: > > > Hi, I really don't want to make this any longer than necessary as it is > > embarrassing as hell, but is this software for real? The reason I ask is > > that while the website looks like this is a mature product still under > > active development, but: > > > > 1) The starter instructions on the initial page are missing the bit that > > you must start a session on the server, even when the first suggested > > command strongly looks like it should create the damm session itself. > > > > 2) Every single command I have tried on this has lead to a variety of > > unhandled python exceptions which... well... have you guys heard of try, > > except, and all that? I mean if you can't code it right the first fucking > > time, at least try to catch the fucking exceptions in some fucking useful > > error messages. > > > > 3) Couldn't get it work at all in any way. > > > > Following is some of the output I have had to endure: > > > > 1) running your own fucking example command: > > xpra start ssh:192.168.1.114:100 > > --start-child=/home/hugo/jmeter/runjmeter.sh > > 2014-06-09 10:46:01,970 OpenGL support not enabled: No module named gdkgl > > bash: .xpra/run-xpra: No such file or directory > > 2014-06-09 10:46:02,293 connection closed after 0 packets received (0.0 > > bytes) and 1 packets sent (25K bytes) > > 2014-06-09 10:46:02,293 Connection lost > > > > 2) running your won fucking example command AGAIN: > > xpra start ssh:192.168.1.114:100 > > --start-child=/home/hugo/jmeter/runjmeter.sh > > 2014-06-09 10:47:55,424 OpenGL support not enabled: No module named gdkgl > > bash: .xpra/run-xpra: No such file or directory > > 2014-06-09 10:47:55,646 read error for TwoFileConnection(ssh: > > 192.168.1.114:100) > > Traceback (most recent call last): > > File "/usr/lib/python2.7/dist-packages/xpra/net/protocol.py", line 437, > > in _io_thread_loop > > callback() > > File "/usr/lib/python2.7/dist-packages/xpra/net/protocol.py", line 485, > > in _read > > buf = self._conn.read(8192) > > File "/usr/lib/python2.7/dist-packages/xpra/net/bytestreams.py", line > 70, > > in read > > self.may_abort("read") > > File "/usr/lib/python2.7/dist-packages/xpra/net/bytestreams.py", line > 67, > > in may_abort > > self._abort_test(action) > > File "/usr/lib/python2.7/dist-packages/xpra/scripts/main.py", line 602, > > in abort_test > > raise IOError(error_message) > > IOError: cannot read using ['ssh', '-T', '192.168.1.114', > '.xpra/run-xpra', > > '_proxy_start', ':100', '--start-child=/etc/X11/Xsession true', > > '--start-child=/home/hugo/jmeter/runjmeter.sh']: the SSH process has > > terminated with exit code=127 > > 2014-06-09 10:47:55,654 write error for TwoFileConnection(ssh: > > 192.168.1.114:100) > > Traceback (most recent call last): > > File "/usr/lib/python2.7/dist-packages/xpra/net/protocol.py", line 437, > > in _io_thread_loop > > callback() > > File "/usr/lib/python2.7/dist-packages/xpra/net/protocol.py", line 471, > > in _write > > written = self._conn.write(buf) > > File "/usr/lib/python2.7/dist-packages/xpra/net/bytestreams.py", line > 74, > > in write > > self.may_abort("write") > > File "/usr/lib/python2.7/dist-packages/xpra/net/bytestreams.py", line > 67, > > in may_abort > > self._abort_test(action) > > File "/usr/lib/python2.7/dist-packages/xpra/scripts/main.py", line 602, > > in abort_test > > raise IOError(error_message) > > IOError: cannot write using ['ssh', '-T', '192.168.1.114', > > '.xpra/run-xpra', '_proxy_start', ':100', > '--start-child=/etc/X11/Xsession > > true', '--start-child=/home/hugo/jmeter/runjmeter.sh']: the SSH process > has > > terminated with exit code=127 > > 2014-06-09 10:47:55,654 connection closed after 0 packets received (0.0 > > bytes) and 1 packets sent (0.0 bytes) > > > > 3) running your own fucking example command AFTER STARTING A SERVER > > SESSION: > > xpra start ssh:192.168.1.114:100 > > --start-child=/home/hugo/jmeter/runjmeter.sh > > 2014-06-09 10:52:54,778 OpenGL support not enabled: No module named gdkgl > > Traceback (most recent call last): > > File "/usr/bin/xpra", line 8, in <module> > > sys.exit(main(sys.argv[0], sys.argv)) > > File "/usr/lib/python2.7/dist-packages/xpra/scripts/main.py", line 70, > in > > main > > return run_mode(script_file, parser, options, args, mode) > > File "/usr/lib/python2.7/dist-packages/xpra/scripts/main.py", line 620, > > in run_mode > > return run_proxy(parser, options, script_file, args, mode) > > File "/usr/lib/python2.7/dist-packages/xpra/scripts/main.py", line > 1074, > > in run_proxy > > assert len(args)==1, "proxy/shadow-start: expected 1 argument but got > > %s" % len(args) > > AssertionError: proxy/shadow-start: expected 1 argument but got 2 > > 2014-06-09 10:52:55,062 Connection lost > > 2014-06-09 10:52:55,063 connection closed after 0 packets received (0.0 > > bytes) and 1 packets sent (25K bytes) > > > > > > > > > > Stop developing software. I rest my case. > > > > Hugo Campos > > > > PS: send any replies directly as I have obviously not subscribed this > > mailing list > > _______________________________________________ > > shifter-users mailing list > > [email protected] > > http://lists.devloop.org.uk/mailman/listinfo/shifter-users > > > > > > -- > Eric Blade - 707-99-BLADE > http://www.ericbla.de/ > > When they broke open molecules, they found they were only stuffed with > atoms. > But when they broke open atoms, they found them stuffed with explosions. > > "I hate how the assembly directions for my new desk are more difficult to > understand than the programming languages I use while at the desk."- Phil > Miller > _______________________________________________ > shifter-users mailing list > [email protected] > http://lists.devloop.org.uk/mailman/listinfo/shifter-users > _______________________________________________ shifter-users mailing list [email protected] http://lists.devloop.org.uk/mailman/listinfo/shifter-users
