Thanks a lot, Michael for your nice explanation. I got all the answers of the confusions that was in my mind. I will try to customize BoilerPlate application for my project. I hope it will make my job easier. Thanks Shafiq
On Mon, Jul 4, 2011 at 5:34 PM, mike healy <[email protected]> wrote: > Hi Shafiq, > > I don't think that I really understand your question about > Bluetooth.dataAvailable(). This event is signaled when the Shimmer receives > data from the master device (i.e. the host side/PC). Say for example you > connect to the Shimmer's com port with a terminal emulator such as > Hyperterminal or Putty, then you just type a space into the applications > window to send "spacebar". > > AccelECG does not work with ShimmerConnect. When you tried this you should > have seen an error something along the lines of the shimmer's configuration > could not be read. AccelECG works with older, now deprecated, applications > such as "Shimmer Display" and BioMOBIUS. BoilerPlate can very easily be > configured to have the same functionality as AccelECG, i.e. send the accel > and ecg data at a specified sampling rate. > > BoilerPlate replicates the functionality of all the "BioMOBIUS" > applications and works with ShimmerConnect and the recently released Shimmer > Labview library. > > The Listen application is used to receive data from the 802.15.4 radio, not > Bluetooth. You probably could configure a shimmer to use the same packet > format with Bluetooth, but this would be highly inefficient (and not very > simple) as the Bluetooth stack automatically handles many of the things that > have to be dealt with manually when using 802.15.4 (error detection, > reliable comms, etc.). > > Best regards, > Michael > > > On Sun, Jul 3, 2011 at 2:17 AM, Shafiqul Amin <[email protected]> wrote: > >> Hi, >> Can anybody explain me the functionality of the method >> *Bluetooth.dataAvailable(uint8_t data)* >> in AccelECG.nc file? How to send data like "spacebar"? >> >> I compiled and installed a fresh copy of AccelECG applicatoin of my >> shimmer node. Then, I tried to get data using "ShimmerConnect" application >> but nothing is displayed on the graph. Then I tried to get raw data using >> Listen application to the COM port configured to my bluetooth module. But >> nothing is coming from the node. >> Any thing am I missing that is protecting to get data to my pc? >> >> [ I was successfully getting data on the graph of shimmerconnect >> application using boilerPlate firmware] >> >> Thanks >> Shafiq >> >> _______________________________________________ >> Shimmer-users mailing list >> [email protected] >> https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users >> >> >
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
