Did you try without the nrpe-booster module on poller ?
2015-05-13 20:11 GMT+02:00 David Good <dg...@willingminds.com>:
> On 5/12/15 4:16 PM, David Good wrote:
>
> On 5/12/15 2:46 PM, Felipe openglx wrote:
>
> The devs will be able to give more specifics (maybe even confirm if
> 2.4 performs better for your case?) but I faced similar issues with
> timeout because of the time it took to "slice and dice" the amount of
> objects.
> If you can enable debug mode on all nodes and provide some captures it
> would be great.
>
> OK -- I'll see about setting that up.
>
>
>
> Here's one set of captures. I'm choosing timeouts between daemons running
> on the same server as the arbiter so there's no issue of network
> interference or clock skew.
>
> Here's the arbiter:
>
> [1431539957] INFO: [Shinken] [All] Trying to send configuration to poller
> poller-1
> [1431539960] ERROR: [Shinken] Failed sending configuration for poller-1:
> Connexion error to http://shinken1.dc1.example.com:7771/ : Operation timed
> out after 3001 milliseconds with 0 bytes received
> [1431539960] INFO: [Shinken] [All] Trying to send configuration to poller
> poller-4
>
>
> Here's the corresponding entries from poller-1. Note that we have a lot
> of servers we're checking via NRPE but that don't have the NRPE daemon
> setup properly yet to allow access from the shinken servers, which looking
> at the code where these error messages are generated seems to be the cause
> of these errors:
>
> [1431539922] DEBUG: [Shinken] Error on SSL shutdown : library=missing
> reason=missing : [] ; Tracebac
> k (most recent call last):
> File "/var/lib/shinken/modules/booster-nrpe/module.py", line 220, in close
> break
> Error: []
>
> [1431539957] DEBUG: [Shinken] Error on SSL shutdown : library=missing
> reason=missing : [] ; Tracebac
> k (most recent call last):
> File "/var/lib/shinken/modules/booster-nrpe/module.py", line 220, in close
> break
> Error: []
>
> [1431539957] DEBUG: [Shinken] Error on SSL shutdown : library=missing
> reason=missing : [] ; Tracebac
> k (most recent call last):
> File "/var/lib/shinken/modules/booster-nrpe/module.py", line 220, in close
> break
> Error: []
>
> [1431540097] DEBUG: [Shinken] socket.shutdown failed: [Errno 107] Transport
> endpoint is not connecte
> d
> [1431540097] DEBUG: [Shinken] socket.shutdown failed: [Errno 9] Bad file
> descriptor
> [1431540097] DEBUG: [Shinken] Error on SSL shutdown : library=missing
> reason=missing : [] ; Tracebac
> k (most recent call last):
> File "/var/lib/shinken/modules/booster-nrpe/module.py", line 220, in close
> break
> Error: []
>
>
> There doesn't seem to be anything going on with the poller at the time
> that the arbiter is complaining about it not responding.
>
>
>
>
> ------------------------------------------------------------------------------
> One dashboard for servers and applications across Physical-Virtual-Cloud
> Widest out-of-the-box monitoring support with 50+ applications
> Performance metrics, stats and reports that give you Actionable Insights
> Deep dive visibility with transaction tracing using APM Insight.
> http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
> _______________________________________________
> Shinken-devel mailing list
> Shinken-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/shinken-devel
>
>
------------------------------------------------------------------------------
One dashboard for servers and applications across Physical-Virtual-Cloud
Widest out-of-the-box monitoring support with 50+ applications
Performance metrics, stats and reports that give you Actionable Insights
Deep dive visibility with transaction tracing using APM Insight.
http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________
Shinken-devel mailing list
Shinken-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shinken-devel
