I use
Daubert from Mitchell golf.
Part A is white, Part B is Black, mix the 2 equally and you get
gray, mixed with a tad of black paste dispersion, and matches black ferrules and
you do not get those unsightly epoxy rings.
Also
have used Dynacraft and Golfsmith 24 hour in the past with no
problems.
The
only epoxy I had to fail was the Golfsmith formulation for graphite shafts, did
not hold very well, never harden.
All
the mention are critical factors
Mike Walker, mwalker@WalkTech.com
www.WalkTech.com
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Barrette Bob
Sent: Tuesday, October 08, 2002 3:25 PM
To: [EMAIL PROTECTED]
Subject: ShopTalk: EpoxyWith all the epoxies out there, each Component Supplier selling a different brand. What Brand do you Professional Club makers use ? And have had no problems with. Also in your opinion what is the most critical factor in a solid bond? (a).Proper mix ratio (b). Thorough mixture of parts a & b. (c).Cleaning of heads, abrading of shafts. (d). Application. (e).Cure time. (f).Temperature during cure. (g). Brand of epoxy.
I use Daubert, Epoweld and S.A. 2000.
Also does any one know what Karsten ( Ping) uses? They take the most heat before they break loose.
Thanks in advance.
Bob
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos, & more
faith.yahoo.com
