Scott and Ron, are the 2 shaft pullers mentioned by Scott decent pullers? I am also in the market for a good inexpensive shaft puller.
Thanks, Stephen -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Kellison Sent: Wednesday, March 12, 2003 7:19 AM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: shat puller? Slippage isn't a problem if you remember to change the rubber jaw liner at regular intervals. I use 3/8" fuel line hose that I buy at Canadian Tire by the foot. Cheap replacements, works very well. Regards, Ron Scott Bershing wrote: >I've been using the Tflan homebrew shaft puller for the last couple years, and it has worked pretty well. The problem is that the vise I built it for is questionable, and access to the materials to rebuild it is no longer there for me. So, I'm in the market for a shaft puller. I'm trying to keep the price at a minimum, and Mitchell has their 2001 models on clearance. The pro model that was normally $169 are $119, and the original model that was normally $139 are now $89. > >Anyone have any good or bad things to say about these. If I remember, these models seemed to have a problem with slippage. > >Thanks, > >Scott > > > > >
