Dean,

How did it "feel" as compared to the original Nitro?

Cub
----- Original Message -----
From: "Dean" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 02, 2003 5:10 PM
Subject: ShopTalk: Grafalloy NitoFlex Lite


> Played the first round of the year with a new driver with a GS TI-310 head
and the NitroFlex Lite R flex shaft. I cut 1" from the
> butt to make a 46.6" club. I left the extra 0.6" on the butt to
accommodate an SRV II head so that such a club will be 46". The
> TI-310 head has a 1.6" shaft tip to ground distance while the SRV II is
only 1".
>
> I gripped the club down about a half inch and started out. First five
drives were right, with a bit of fade on a couple of them. All
> were in the 190 to 220 yards. Not good so decided I must be babying the
thing because of the low 224 cpm at 46" club length. Started
> swinging harder and was really surprised when everything straightened out
and I started hitting and straight. On all four par fives
> which vary from 470 to 513 yards I was just off the greens in two. :-)))
Chipping and putting were bad but I was very happy with
> 86. Was hitting approaches and chipping with a 46 degree wood. Pretty bad
so it goes in the reject box. Greens are still really
> uneven and varying from slow to fast every few feet, but the grass is
starting to green up and be fine by next week.
>
> Also will be trying the Jackaroo II and their new mallet head putter with
three lines on the top.
> DeanS
>
> Some numbers on the NitroFlex lite:
>  With 41 inches sticking out of the clamp, but no tip weight at all
frequency = 951 cpm.
>
> All the following were with 5" butt clamped, 205 gram tip weight with CG
of weight centered on the shaft tip.
>  Less than 1 cpm of difference in frequency as I rotated the shaft.
>  With 41 inches sticking out of the clamp, frequency = 224 cpm.
>  With 40 inches sticking out of the clamp, frequency = 231 cpm.
>  With 39 inches sticking out of the clamp, frequency = 238 cpm.
>  With 38 inches sticking out of the clamp, frequency = 246 cpm.
>
>
>
>
>


Reply via email to