|
Had a guy in yesterday with a set of Titleist
irons. They had been plugged 1/4" longer. He wanted them 3/4" longer. The task
was to get the old plugs out.
What I did was this; I have a length of 1/2" steel
rod. I shoved the rod into the extension and clamped the extension/rod in my
bench vise. I squeezed the extension against the rod as tightly as possible. I
heated the area below the shaft butt with a propane torch and twisted the shaft
using the head for leverage. I got every extension out with no problems,
including 2 that were plastic.
It beats breaking them out for sure. Maybe someone
here has a better way but this is the one way I've found that works every time.
TFlan
|
